Merge branch 'master' into next

[u-boot] / board / amcc / taishan / taishan.c

diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c
index 4a0573eb3804b5cc5eb4c909d0d37f995395f66a..cac7a78d69e57ad54e60eb68dba6230daf85c8c2 100644 (file)
--- a/board/amcc/taishan/taishan.c
+++ b/board/amcc/taishan/taishan.c
@@ -209,110 +209,6 @@ int checkboard (void)
        return (0);
 }
 
-/*************************************************************************
- *  pci_pre_init
- *
- *  This routine is called just prior to registering the hose and gives
- *  the board the opportunity to check things. Returning a value of zero
- *  indicates that things are bad & PCI initialization should be aborted.
- *
- *     Different boards may wish to customize the pci controller structure
- *     (add regions, override default access routines, etc) or perform
- *     certain pre-initialization actions.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int pci_pre_init(struct pci_controller * hose )
-{
-       unsigned long strap;
-
-       /*--------------------------------------------------------------------------+
-        *      The ocotea board is always configured as the host & requires the
-        *      PCI arbiter to be enabled.
-        *--------------------------------------------------------------------------*/
-       mfsdr(SDR0_SDSTP1, strap);
-       if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){
-               printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap);
-               return 0;
-       }
-
-       return 1;
-}
-#endif /* defined(CONFIG_PCI) */
-
-/*************************************************************************
- *  pci_target_init
- *
- *     The bootstrap configuration provides default settings for the pci
- *     inbound map (PIM). But the bootstrap config choices are limited and
- *     may not be sufficient for a given board.
- *
- ************************************************************************/
-#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
-{
-       /*--------------------------------------------------------------------------+
-        * Disable everything
-        *--------------------------------------------------------------------------*/
-       out32r( PCIX0_PIM0SA, 0 ); /* disable */
-       out32r( PCIX0_PIM1SA, 0 ); /* disable */
-       out32r( PCIX0_PIM2SA, 0 ); /* disable */
-       out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
-
-       /*--------------------------------------------------------------------------+
-        * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
-        * options to not support sizes such as 128/256 MB.
-        *--------------------------------------------------------------------------*/
-       out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
-       out32r( PCIX0_PIM0LAH, 0 );
-       out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
-
-       out32r( PCIX0_BAR0, 0 );
-
-       /*--------------------------------------------------------------------------+
-        * Program the board's subsystem id/vendor id
-        *--------------------------------------------------------------------------*/
-       out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
-       out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
-
-       out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
-}
-#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
-
-/*************************************************************************
- *  is_pci_host
- *
- *     This routine is called to determine if a pci scan should be
- *     performed. With various hardware environments (especially cPCI and
- *     PPMC) it's insufficient to depend on the state of the arbiter enable
- *     bit in the strap register, or generic host/adapter assumptions.
- *
- *     Rather than hard-code a bad assumption in the general 440 code, the
- *     440 pci code requires the board to decide at runtime.
- *
- *     Return 0 for adapter mode, non-zero for host (monarch) mode.
- *
- *
- ************************************************************************/
-#if defined(CONFIG_PCI)
-int is_pci_host(struct pci_controller *hose)
-{
-       /* The ocotea board is always configured as host. */
-       return(1);
-}
-#endif /* defined(CONFIG_PCI) */
-
-#ifdef CONFIG_POST
-/*
- * Returns 1 if keys pressed to start the power-on long-running tests
- * Called from board_init_f().
- */
-int post_hotkeys_pressed(void)
-{
-       return (ctrlc());
-}
-#endif
-
 int board_eth_init(bd_t *bis)
 {
        cpu_eth_init(bis);