arm926ejs, at91: add common phy_reset function

[u-boot] / board / atmel / at91sam9263ek / at91sam9263ek.c

diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c
index 2e9246f31ccef49127c332e0d7d2f0902eae4aa4..d42a1730cc38fe338f70526190dda0ad71349d00 100644 (file)
--- a/board/atmel/at91sam9263ek/at91sam9263ek.c
+++ b/board/atmel/at91sam9263ek/at91sam9263ek.c
@@ -12,7 +12,6 @@
 #include <asm/arch/at91sam9_smc.h>
 #include <asm/arch/at91_common.h>
 #include <asm/arch/at91_pmc.h>
-#include <asm/arch/at91_rstc.h>
 #include <asm/arch/at91_matrix.h>
 #include <asm/arch/at91_pio.h>
 #include <asm/arch/clk.h>
@@ -82,10 +81,9 @@ static void at91sam9263ek_nand_hw_init(void)
 #ifdef CONFIG_MACB
 static void at91sam9263ek_macb_hw_init(void)
 {
-       unsigned long   erstl;
        at91_pmc_t      *pmc    = (at91_pmc_t *) ATMEL_BASE_PMC;
        at91_pio_t      *pio    = (at91_pio_t *) ATMEL_BASE_PIO;
-       at91_rstc_t     *rstc   = (at91_rstc_t *) ATMEL_BASE_RSTC;
+
        /* Enable clock */
        writel(1 << ATMEL_ID_EMAC, &pmc->pcer);
 
@@ -97,23 +95,10 @@ static void at91sam9263ek_macb_hw_init(void)
         *
         * PHY has internal pull-down
         */
-
        writel(1 << 25, &pio->pioc.pudr);
        writel((1 << 25) | (1 <<26), &pio->pioe.pudr);
 
-       erstl = readl(&rstc->mr) & AT91_RSTC_MR_ERSTL_MASK;
-
-       /* Need to reset PHY -> 500ms reset */
-       writel(AT91_RSTC_KEY | AT91_RSTC_MR_ERSTL(0x0D) |
-               AT91_RSTC_MR_URSTEN, &rstc->mr);
-
-       writel(AT91_RSTC_KEY | AT91_RSTC_CR_EXTRST, &rstc->cr);
-       /* Wait for end hardware reset */
-       while (!(readl(&rstc->sr) & AT91_RSTC_SR_NRSTL))
-               ;
-
-       /* Restore NRST value */
-       writel(AT91_RSTC_KEY | erstl | AT91_RSTC_MR_URSTEN, &rstc->mr);
+       at91_phy_reset();
 
        /* Re-enable pull-up */
        writel(1 << 25, &pio->pioc.puer);