*/
#if defined(CONFIG_CMD_BSP)
-#undef DEBUG
-#ifdef DEBUG
-# define dprintf(fmt,args...) printf(fmt, ##args)
-#else
-# define dprintf(fmt,args...)
-#endif
-
/*
* Definitions for DS1620 chip
*/
#define THERM_WRITE_TL 0x02
#define THERM_WRITE_TH 0x01
-#define CONFIG_SYS_CPU 2
#define CONFIG_SYS_1SHOT 1
#define CONFIG_SYS_STANDALONE 0
static int init_done = 0;
if (init_done) {
-/* dprintf("sm501_gpio_init: nothing to be done.\n"); */
+ debug("sm501_gpio_init: nothing to be done.\n");
return 1;
}
(PWR_OFF | BUZZER | FP_DATA_TRI);
init_done = 1;
-/* dprintf("sm501_gpio_init: done.\n"); */
+ debug("sm501_gpio_init: done.\n");
+
return 0;
}
* read and prints the dip switch
* and/or external config inputs (4bits) 0...0x0F
*/
-int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
vu_long rc = 0;
}
U_BOOT_CMD (dip, 1, 1, cmd_dip,
- "dip - read dip switch and config inputs\n",
+ "read dip switch and config inputs",
"\n"
" - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n"
- " - \"Config 1\" is the LSB\n");
+ " - \"Config 1\" is the LSB");
/*
* buz - turns Buzzer on/off
*/
#ifdef CONFIG_BC3450_BUZZER
-static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
if (argc != 2) {
printf ("Usage:\nspecify one argument: \"on\" or \"off\"\n");
}
U_BOOT_CMD (buz, 2, 1, cmd_buz,
- "buz - turns buzzer on/off\n",
- "\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
+ "turns buzzer on/off",
+ "\n" "buz <on/off>\n" " - turns the buzzer on or off");
#endif /* CONFIG_BC3450_BUZZER */
/*
* fp - front panel commands
*/
-static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
sm501_gpio_init ();
}
U_BOOT_CMD (fp, 3, 1, cmd_fp,
- "fp - front panes access functions\n",
+ "front panes access functions",
"\n"
"fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n"
- "fp <on/off>\n" " - turns the whole display on/off\n"
+ "fp <on/off>\n" " - turns the whole display on/off"
#ifdef CONFIG_BC3450_CRT
+ "\n"
"fp crt <on/off>\n"
- " - enables/disables the crt output (debug only)\n"
+ " - enables/disables the crt output (debug only)"
#endif /* CONFIG_BC3450_CRT */
);
-
/*
* temp - DS1620 thermometer
*/
ds1620_out (THERM_START_CONVERT, 0, 0);
}
-static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
int i;
struct therm therm;
}
U_BOOT_CMD (temp, 3, 1, cmd_temp,
- "temp - print current temperature\n",
- "\n" "temp\n" " - print current temperature\n");
+ "print current temperature",
+ "\n" "temp\n" " - print current temperature");
#ifdef CONFIG_BC3450_CAN
/*
* return 1 on CAN failure
* return 0 if no failure
*/
-int do_can (char *argv[])
+int do_can (char * const argv[])
{
int i;
struct mpc5xxx_mscan *can1 =
/*
* test - BC3450 HW test routines
*/
-int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
#ifdef CONFIG_BC3450_CAN
int rcode;
return 1;
}
-U_BOOT_CMD (test, 2, 1, cmd_test, "test - unit test routines\n", "\n"
+U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN
- "test can\n"
- " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
+ "test can\n"
+ " - connect CAN1 (X8) with CAN2 (X9) for this test\n"
#endif /* CONFIG_BC3450_CAN */
- "test unit-off\n"
- " - turns off the BC3450 unit\n"
- " WARNING: Unsaved environment variables will be lost!\n");
+ "test unit-off\n"
+ " - turns off the BC3450 unit\n"
+ " WARNING: Unsaved environment variables will be lost!"
+);
#endif