*
* Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#ifdef CONFIG_CMD_BSP
-int do_i2c(char *argv[])
-{
- unsigned char temp, temp1;
-
- printf("Starting I2C Test\n"
- "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
- "Please press any key to start\n\n");
- getc();
-
- temp = 0xf0; /* set io 0-4 as output */
- i2c_write(CFG_I2C_IO, 3, 1, (uchar *)&temp, 1);
-
- printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
- "Press any key to stop\n\n");
-
- while (!tstc()) {
- i2c_read(CFG_I2C_IO, 0, 1, (uchar *)&temp, 1);
- temp1 = (temp >> 4) & 0x03;
- temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
- temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
- temp = temp1;
- i2c_write(CFG_I2C_IO, 1, 1, (uchar *)&temp, 1);
- }
- getc();
-
- return 0;
-}
-
-int do_usbtest(char *argv[])
+static int do_usb_test(char * const argv[])
{
int i;
static int usb_stor_curr_dev = -1; /* current device */
return 0;
}
-int do_led(char *argv[])
+static int do_led_test(char * const argv[])
{
int i = 0;
struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
return 0;
}
-int do_rs232(char *argv[])
+static int do_rs232_test(char * const argv[])
{
int error_status = 0;
struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
error_status = 1;
break;
}
- gpio->port_config |= (CFG_GPS_PORT_CONFIG & 0xFF0FF80F);
+ gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F);
return error_status;
}
-int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rcode = -1;
switch (argc) {
case 2:
- if (strncmp(argv[1], "i2c", 3) == 0)
- rcode = do_i2c(argv);
- else if (strncmp(argv[1], "led", 3) == 0)
- rcode = do_led(argv);
+ if (strncmp(argv[1], "led", 3) == 0)
+ rcode = do_led_test(argv);
else if (strncmp(argv[1], "usb", 3) == 0)
- rcode = do_usbtest(argv);
+ rcode = do_usb_test(argv);
break;
case 3:
if (strncmp(argv[1], "rs232", 3) == 0)
- rcode = do_rs232(argv);
+ rcode = do_rs232_test(argv);
break;
}
U_BOOT_CMD(
fkt, 4, 1, cmd_fkt,
- "fkt - Function test routines\n",
+ "Function test routines",
"i2c\n"
" - Test I2C communication\n"
"fkt led\n"
"fkt rs232 number\n"
" - Test RS232 (loopback plug(s) for RS232 required)\n"
"fkt usb\n"
- " - Test USB communication\n"
+ " - Test USB communication"
);
#endif /* CONFIG_CMD_BSP */