i2c: Drop use of CONFIG_I2C_HARD

[u-boot] / board / cm5200 / cmd_cm5200.c

diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index 9c40ad7b2a2c9fe885916529ab4e0e39090a9142..60097dc8c7d21a9c41f2cfbe07f793e2bc54b11d 100644 (file)
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -13,34 +13,6 @@
 
 #ifdef CONFIG_CMD_BSP
 
-static int do_i2c_test(char * const argv[])
-{
-       unsigned char temp, temp1;
-
-       printf("Starting I2C Test\n"
-               "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n"
-               "Please press any key to start\n\n");
-       getc();
-
-       temp = 0xf0; /* set io 0-4 as output */
-       i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1);
-
-       printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n"
-               "Press any key to stop\n\n");
-
-       while (!tstc()) {
-               i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1);
-               temp1 = (temp >> 4) & 0x03;
-               temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */
-               temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */
-               temp = temp1;
-               i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1);
-       }
-       getc();
-
-       return 0;
-}
-
 static int do_usb_test(char * const argv[])
 {
        int i;
@@ -387,9 +359,7 @@ static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
        switch (argc) {
        case 2:
-               if (strncmp(argv[1], "i2c", 3) == 0)
-                       rcode = do_i2c_test(argv);
-               else if (strncmp(argv[1], "led", 3) == 0)
+               if (strncmp(argv[1], "led", 3) == 0)
                        rcode = do_led_test(argv);
                else if (strncmp(argv[1], "usb", 3) == 0)
                        rcode = do_usb_test(argv);