cm-t35: use gpio_led driver for status led

[u-boot] / board / compulab / cm_t35 / cm_t35.c

diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index b0b80e5bc90a318ee8c6cbd2e3769b3d44f05f84..b9a996594fb0b256a2cb5b9dc1e3fb68c6b937a9 100644 (file)
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -9,22 +9,7 @@
  *     Richard Woodruff <r-woodruff2@ti.com>
  *     Syed Mohammed Khasim <x0khasim@ti.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -48,7 +33,7 @@
 #include <asm/ehci-omap.h>
 #include <asm/gpio.h>
 
-#include "eeprom.h"
+#include "../common/eeprom.h"
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -120,7 +105,7 @@ static inline int splash_load_from_nand(void)
 }
 #endif /* CONFIG_CMD_NAND */
 
-int board_splash_screen_prepare(void)
+int splash_screen_prepare(void)
 {
        char *env_splashimage_value;
        u32 bmp_load_addr;
@@ -175,7 +160,7 @@ static u32 cm_t3x_rev;
 u32 get_board_rev(void)
 {
        if (!cm_t3x_rev)
-               cm_t3x_rev = cm_t3x_eeprom_get_board_rev();
+               cm_t3x_rev = cl_eeprom_get_board_rev();
 
        return cm_t3x_rev;
 };
@@ -524,7 +509,7 @@ static int handle_mac_address(void)
        if (rc)
                return 0;
 
-       rc = cm_t3x_eeprom_read_mac_addr(enetaddr);
+       rc = cl_eeprom_read_mac_addr(enetaddr);
        if (rc)
                return rc;
 
@@ -580,7 +565,8 @@ struct omap_usbhs_board_data usbhs_bdata = {
 };
 
 #define SB_T35_USB_HUB_RESET_GPIO      167
-int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+int ehci_hcd_init(int index, enum usb_init_type init,
+               struct ehci_hccr **hccr, struct ehci_hcor **hcor)
 {
        u8 val;
        int offset;
@@ -606,12 +592,11 @@ int ehci_hcd_init(int index, struct ehci_hccr **hccr, struct ehci_hcor **hcor)
        twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, offset, 0xC0);
        udelay(1);
 
-       return omap_ehci_hcd_init(&usbhs_bdata, hccr, hcor);
+       return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
 }
 
 int ehci_hcd_stop(void)
 {
        return omap_ehci_hcd_stop();
 }
-
 #endif /* CONFIG_USB_EHCI_OMAP */