env: Rename eth_setenv_enetaddr() to eth_env_set_enetaddr()

[u-boot] / board / compulab / cm_t35 / cm_t35.c

diff --git a/board/compulab/cm_t35/cm_t35.c b/board/compulab/cm_t35/cm_t35.c
index 43463d5b4701cf0220049e3f82e34f47d40e608e..e1cf7fc4d620d2bc80eb84c6847e77d7f6922610 100644 (file)
--- a/board/compulab/cm_t35/cm_t35.c
+++ b/board/compulab/cm_t35/cm_t35.c
@@ -19,11 +19,12 @@
 #include <i2c.h>
 #include <usb.h>
 #include <mmc.h>
+#include <splash.h>
 #include <twl4030.h>
 #include <linux/compiler.h>
 
 #include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/arch/mem.h>
 #include <asm/arch/mux.h>
 #include <asm/arch/mmc_host_def.h>
@@ -59,11 +60,19 @@ void get_board_mem_timings(struct board_sdrc_timings *timings)
 }
 #endif
 
-#define CM_T35_SPLASH_NAND_OFFSET 0x100000
+struct splash_location splash_locations[] = {
+       {
+               .name = "nand",
+               .storage = SPLASH_STORAGE_NAND,
+               .flags = SPLASH_STORAGE_RAW,
+               .offset = 0x100000,
+       },
+};
 
 int splash_screen_prepare(void)
 {
-       return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET);
+       return splash_source_load(splash_locations,
+                                 ARRAY_SIZE(splash_locations));
 }
 
 /*
@@ -83,8 +92,8 @@ int board_init(void)
        /* boot param addr */
        gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
-#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
-       status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#if defined(CONFIG_LED_STATUS) && defined(CONFIG_LED_STATUS_BOOT_ENABLE)
+       status_led_set(CONFIG_LED_STATUS_BOOT, CONFIG_LED_STATUS_ON);
 #endif
 
        return 0;
@@ -96,13 +105,13 @@ int board_init(void)
  */
 u32 get_board_rev(void)
 {
-       return cl_eeprom_get_board_rev();
+       return cl_eeprom_get_board_rev(CONFIG_SYS_I2C_EEPROM_BUS);
 };
 
 int misc_init_r(void)
 {
        cl_print_pcb_info();
-       dieid_num_r();
+       omap_die_id_display();
 
        return 0;
 }
@@ -363,7 +372,7 @@ void set_muxconf_regs(void)
                cm_t3730_set_muxconf();
 }
 
-#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#if defined(CONFIG_MMC)
 #define SB_T35_WP_GPIO 59
 
 int board_mmc_getcd(struct mmc *mmc)
@@ -382,14 +391,14 @@ int board_mmc_init(bd_t *bis)
 }
 #endif
 
-#if defined(CONFIG_GENERIC_MMC)
+#if defined(CONFIG_MMC)
 void board_mmc_power_init(void)
 {
        twl4030_power_mmc_init(0);
 }
 #endif
 
-#ifdef CONFIG_SYS_I2C_OMAP34XX
+#ifdef CONFIG_SYS_I2C_OMAP24XX
 /*
  * Routine: reset_net_chip
  * Description: reset the Ethernet controller via TPS65930 GPIO
@@ -429,14 +438,14 @@ static int handle_mac_address(void)
        if (rc)
                return 0;
 
-       rc = cl_eeprom_read_mac_addr(enetaddr);
+       rc = cl_eeprom_read_mac_addr(enetaddr, CONFIG_SYS_I2C_EEPROM_BUS);
        if (rc)
                return rc;
 
-       if (!is_valid_ether_addr(enetaddr))
+       if (!is_valid_ethaddr(enetaddr))
                return -1;
 
-       return eth_setenv_enetaddr("ethaddr", enetaddr);
+       return eth_env_set_enetaddr("ethaddr", enetaddr);
 }
 
 /*