Add port for the lpc2292sodimm evaluation board from EmbeddedArtists

[u-boot] / board / cpc45 / cpc45.c

diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 92ccd42e7f714516fb96153889b88c80e9806cc4..51b0085911b9edfb8574b4997044867aca3c93ac 100644 (file)
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -24,11 +24,13 @@
 #include <common.h>
 #include <mpc824x.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <pci.h>
 #include <i2c.h>
 
 int sysControlDisplay(int digit, uchar ascii_code);
 extern void Plx9030Init(void);
+extern void SPD67290Init(void);
 
        /* We have to clear the initial data area here. Couldn't have done it
         * earlier because DRAM had not been initialized.
@@ -180,6 +182,10 @@ static struct pci_config_table pci_cpc45_config_table[] = {
          pci_cfgfunc_config_device, { PCI_PLX9030_IOADDR,
                                       PCI_PLX9030_MEMADDR,
                                       PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER }},
+       { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x0E, PCI_ANY_ID,
+         pci_cfgfunc_config_device, { PCMCIA_IO_BASE,
+                                      PCMCIA_IO_BASE,
+                                      PCI_COMMAND_MEMORY | PCI_COMMAND_IO }},
 #endif /*CONFIG_PCI_PNP*/
        { }
 };
@@ -233,3 +239,37 @@ int sysControlDisplay (int digit,  /* number of digit 0..7 */
 
        return (0);
 }
+
+#if (CONFIG_COMMANDS & CFG_CMD_PCMCIA)
+
+#ifdef CFG_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#endif
+
+int pcmcia_init(void)
+{
+       u_int rc;
+
+       debug ("Enable PCMCIA " PCMCIA_SLOT_MSG "\n");
+
+       rc = i82365_init();
+
+       return rc;
+}
+
+#endif /* CFG_CMD_PCMCIA */
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+       u_char  val;
+       /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+       val = readb(BCSR_BASE + 0x04);
+       if (status) {                           /* led on */
+               val |= B_CTRL_LED0;
+       } else {
+               val &= ~B_CTRL_LED0;
+       }
+       writeb(val, BCSR_BASE + 0x04);
+}
+# endif