* Patch by Gary Jennejohn, 01 Oct 2004:

[u-boot] / board / csb226 / csb226.c

diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
index 11cab005c661b1338be5f80ef099404be8f29deb..bf9b4f840d2b42da546756d50d870d2b1ce12437 100644 (file)
--- a/board/csb226/csb226.c
+++ b/board/csb226/csb226.c
@@ -32,16 +32,16 @@
 # define SHOW_BOOT_PROGRESS(arg)
 #endif
 
-/** 
+/**
  * misc_init_r: - misc initialisation routines
  */
 
 int misc_init_r(void)
 {
+#if 0
        uchar *str;
-       
+
        /* determine if the software update key is pressed during startup */
-#if 0  
        /* not ported yet... */
        if (GPLR0 & 0x00000800) {
                printf("using bootcmd_normal (sw-update button not pressed)\n");
@@ -52,15 +52,15 @@ int misc_init_r(void)
        }
 
        setenv("bootcmd",str);
-#endif 
+#endif
        return 0;
-}      
+}
 
 
-/** 
+/**
  * board_init: - setup some data structures
  *
- * @return: 0 in case of success       
+ * @return: 0 in case of success
  */
 
 int board_init (void)
@@ -80,7 +80,7 @@ int board_init (void)
 }
 
 
-/** 
+/**
  * dram_init: - setup dynamic RAM
  *
  * @return: 0 in case of success
@@ -97,7 +97,7 @@ int dram_init (void)
 }
 
 
-/** 
+/**
  * csb226_set_led: - switch LEDs on or off
  *
  * @param led:   LED to switch (0,1,2)
@@ -108,26 +108,26 @@ void csb226_set_led(int led, int state)
 {
        switch(led) {
 
-               case 0: if (state==1) { 
-                               GPCR0 |= CSB226_USER_LED0; 
+               case 0: if (state==1) {
+                               GPCR0 |= CSB226_USER_LED0;
                        } else if (state==0) {
                                GPSR0 |= CSB226_USER_LED0;
                        }
                        break;
 
                case 1: if (state==1) {
-                                GPCR0 |= CSB226_USER_LED1;
-                        } else if (state==0) {
-                                GPSR0 |= CSB226_USER_LED1;
-                        }
-                        break;
+                               GPCR0 |= CSB226_USER_LED1;
+                       } else if (state==0) {
+                               GPSR0 |= CSB226_USER_LED1;
+                       }
+                       break;
 
                case 2: if (state==1) {
-                                GPCR0 |= CSB226_USER_LED2;
-                        } else if (state==0) {
-                                GPSR0 |= CSB226_USER_LED2;
-                        }
-                        break;
+                               GPCR0 |= CSB226_USER_LED2;
+                       } else if (state==0) {
+                               GPSR0 |= CSB226_USER_LED2;
+                       }
+                       break;
        }
 
        return;
@@ -137,10 +137,10 @@ void csb226_set_led(int led, int state)
 /**
  * show_boot_progress: - indicate state of the boot process
  *
- * @param status: Status number - see README for details. 
+ * @param status: Status number - see README for details.
  *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most 
- * important states (1, 5, 15).  
+ * The CSB226 does only have 3 LEDs, so we switch them on at the most
+ * important states (1, 5, 15).
  */
 
 void show_boot_progress (int status)
@@ -153,4 +153,3 @@ void show_boot_progress (int status)
 
        return;
 }
-