* (C) Copyright 2002
* Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
*
+ * (C) Copyright 2003 (2 x 16 bit Flash bank patches)
+ * Rolf Peukert, IMMS gGmbH, <rolf.peukert@imms.de>
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
#include <asm/arch/pxa-regs.h>
#define FLASH_BANK_SIZE 0x02000000
-#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
+#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
/**
int i, j;
ulong size = 0;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
ulong flashbase = 0;
flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
+ (INTEL_MANUFACT & FLASH_VENDMASK) |
+ (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+ flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
+ memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
switch (i) {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
+ case 0:
+ flashbase = PHYS_FLASH_1;
+ break;
+ default:
+ panic("configured too many flash banks!\n");
+ break;
}
for (j = 0; j < flash_info[i].sector_count; j++) {
flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
/* Protect monitor and environment sectors */
flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_FLASH_BASE + monitor_flash_len - 1,
+ CONFIG_SYS_FLASH_BASE,
+ CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
&flash_info[0]);
flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
&flash_info[0]);
return size;
/**
* flash_print_info: - print information about the flash situation
- *
- * @param info:
*/
void flash_print_info (flash_info_t *info)
{
int i, j;
- for (j=0; j<CFG_MAX_FLASH_BANKS; j++) {
+ for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
switch (info->flash_id & FLASH_VENDMASK) {
-
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
+ case (INTEL_MANUFACT & FLASH_VENDMASK):
+ printf ("Intel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
switch (info->flash_id & FLASH_TYPEMASK) {
-
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
+ case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
+ printf("28F128J3 (128Mbit)\n");
+ break;
+ default:
+ printf("Unknown Chip Type\n");
+ return;
}
printf(" Size: %ld MB in %d Sectors\n",
printf(" Sector Start Addresses:");
for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) printf ("\n ");
+ if ((i % 5) == 0) printf ("\n ");
printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
+ info->protect[i] ? " (RO)" : " ");
}
printf ("\n");
info++;
/**
* flash_erase: - erase flash sectors
- *
*/
int flash_erase(flash_info_t *info, int s_first, int s_last)
/* arm simple, non interrupt dependent timer */
reset_timer_masked();
- if (info->protect[sect] == 0) { /* not protected */
+ if (info->protect[sect] == 0) { /* not protected */
u32 * volatile addr = (u32 * volatile)(info->start[sect]);
- /* erase sector: */
+ /* erase sector: */
/* The strata flashs are aligned side by side on */
/* the data bus, so we have to write the commands */
- /* to both chips here: */
+ /* to both chips here: */
*addr = 0x00200020; /* erase setup */
*addr = 0x00D000D0; /* erase confirm */
while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
+ if (get_timer_masked() > CONFIG_SYS_FLASH_ERASE_TOUT) {
*addr = 0x00B000B0; /* suspend erase*/
*addr = 0x00FF00FF; /* read mode */
rc = ERR_TIMOUT;
goto outahere;
}
}
-
*addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* resest to read mode */
-
+ *addr = 0x00FF00FF; /* reset to read mode */
}
-
printf("ok.\n");
}
-
if (ctrlc()) printf("User Interrupt!\n");
- outahere:
-
+outahere:
/* allow flash to settle - wait 10 ms */
udelay_masked(10000);
return rc;
}
-
/**
- * write_word: - copy memory to flash
- *
- * @param info:
- * @param dest:
- * @param data:
- * @return:
+ * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each
*/
-static int write_word (flash_info_t *info, ulong dest, ushort data)
+static int write_long (flash_info_t *info, ulong dest, ulong data)
{
u32 * volatile addr = (u32 * volatile)dest, val;
int rc = ERR_OK;
int flag;
+ /* read array command - just for the case... */
+ *addr = 0x00FF00FF;
+
/* Check if Flash is (sufficiently) erased */
if ((*addr & data) != data) return ERR_NOT_ERASED;
flag = disable_interrupts();
/* clear status register command */
- *addr = 0x50;
+ *addr = 0x00500050;
/* program set-up command */
- *addr = 0x40;
+ *addr = 0x00400040;
/* latch address/data */
*addr = data;
reset_timer_masked();
/* wait while polling the status register */
- while(((val = *addr) & 0x80) != 0x80) {
- if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
+ while(((val = *addr) & 0x00800080) != 0x00800080) {
+ if (get_timer_masked() > CONFIG_SYS_FLASH_WRITE_TOUT) {
rc = ERR_TIMOUT;
- *addr = 0xB0; /* suspend program command */
+ /* suspend program command */
+ *addr = 0x00B000B0;
goto outahere;
}
}
- if(val & 0x1A) { /* check for error */
+ /* check for errors */
+ if(val & 0x001A001A) {
printf("\nFlash write error %02x at address %08lx\n",
(int)val, (unsigned long)dest);
- if(val & (1<<3)) {
+ if(val & 0x00080008) {
printf("Voltage range error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
}
- if(val & (1<<1)) {
+ if(val & 0x00020002) {
printf("Device protect error.\n");
rc = ERR_PROTECTED;
goto outahere;
}
- if(val & (1<<4)) {
+ if(val & 0x00100010) {
printf("Programming error.\n");
rc = ERR_PROG_ERROR;
goto outahere;
goto outahere;
}
- outahere:
-
- *addr = 0xFF; /* read array command */
+outahere:
+ /* read array command */
+ *addr = 0x00FF00FF;
if (flag) enable_interrupts();
return rc;
*
* @param info:
* @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
+ * @param addr: where to copy to
+ * @param cnt: number of bytes to copy
*
* @return error code
*/
+/* "long" version, uses 32bit words */
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
{
ulong cp, wp;
- ushort data;
+ ulong data;
int l;
int i, rc;
- wp = (addr & ~1); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
if ((l = addr - wp) != 0) {
data = 0;
for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
+ for (; i<4 && cnt>0; ++i) {
+ data = (data >> 8) | (*src++ << 24);
--cnt;
++cp;
}
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; cnt==0 && i<4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- if ((rc = write_word(info, wp, data)) != 0) {
+ if ((rc = write_long(info, wp, data)) != 0) {
return (rc);
}
- wp += 2;
+ wp += 4;
}
/*
* handle word aligned part
*/
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((ushort*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
+ while (cnt >= 4) {
+ data = *((ulong*)src);
+ if ((rc = write_long(info, wp, data)) != 0) {
return (rc);
}
- src += 2;
- wp += 2;
- cnt -= 2;
+ src += 4;
+ wp += 4;
+ cnt -= 4;
}
if (cnt == 0) return ERR_OK;
* handle unaligned tail bytes
*/
data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
+ for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+ data = (data >> 8) | (*src++ << 24);
--cnt;
}
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
+ for (; i<4; ++i, ++cp) {
+ data = (data >> 8) | (*(uchar *)cp << 24);
}
- return write_word(info, wp, data);
+ return write_long(info, wp, data);
}
projects / u-boot / blobdiff