Add GPL-2.0+ SPDX-License-Identifier to source files

[u-boot] / board / davinci / dm365evm / dm365evm.c

diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c
index 99392b3967f1f51c4acbe10522aab4b591fc0c7b..ceffd4d6038e0b6b164fb1e5476060a792841628 100644 (file)
--- a/board/davinci/dm365evm/dm365evm.c
+++ b/board/davinci/dm365evm/dm365evm.c
@@ -1,26 +1,22 @@
 /*
+ * Copyright (C) 2009 Texas Instruments Incorporated
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <nand.h>
+#include <asm/io.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/emif_defs.h>
 #include <asm/arch/nand_defs.h>
-#include "../common/misc.h"
+#include <asm/arch/gpio.h>
+#include <netdev.h>
+#include <asm/arch/davinci_misc.h>
+#ifdef CONFIG_DAVINCI_MMC
+#include <mmc.h>
+#include <asm/arch/sdmmc_defs.h>
+#endif
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -32,12 +28,52 @@ int board_init(void)
        return 0;
 }
 
+#ifdef CONFIG_DRIVER_TI_EMAC
+int board_eth_init(bd_t *bis)
+{
+       uint8_t eeprom_enetaddr[6];
+       int i;
+       struct davinci_gpio *gpio1_base =
+                       (struct davinci_gpio *)DAVINCI_GPIO_BANK01;
+
+       /* Configure PINMUX 3 to enable EMAC pins */
+       writel((readl(PINMUX3) | 0x1affff), PINMUX3);
+
+       /* Configure GPIO20 as output */
+       writel((readl(&gpio1_base->dir) & ~(1 << 20)), &gpio1_base->dir);
+
+       /* Toggle GPIO 20 */
+       for (i = 0; i < 20; i++) {
+               /* GPIO 20 low */
+               writel((readl(&gpio1_base->out_data) & ~(1 << 20)),
+                                               &gpio1_base->out_data);
+
+               udelay(1000);
+
+               /* GPIO 20 high */
+               writel((readl(&gpio1_base->out_data) | (1 << 20)),
+                                               &gpio1_base->out_data);
+       }
+
+       /* Configure I2C pins so that EEPROM can be read */
+       writel((readl(PINMUX3) | 0x01400000), PINMUX3);
+
+       /* Read Ethernet MAC address from EEPROM */
+       if (dvevm_read_mac_address(eeprom_enetaddr))
+               davinci_sync_env_enetaddr(eeprom_enetaddr);
+
+       davinci_emac_initialize();
+
+       return 0;
+}
+#endif
+
 #ifdef CONFIG_NAND_DAVINCI
 static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
 {
        struct nand_chip        *this = mtd->priv;
-       u32                     wbase = (u32) this->IO_ADDR_W;
-       u32                     rbase = (u32) this->IO_ADDR_R;
+       unsigned long           wbase = (unsigned long) this->IO_ADDR_W;
+       unsigned long           rbase = (unsigned long) this->IO_ADDR_R;
 
        if (chip == 1) {
                __set_bit(14, &wbase);
@@ -57,3 +93,48 @@ int board_nand_init(struct nand_chip *nand)
        return 0;
 }
 #endif
+
+#ifdef CONFIG_DAVINCI_MMC
+static struct davinci_mmc mmc_sd0 = {
+       .reg_base       = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
+       .input_clk      = 121500000,
+       .host_caps      = MMC_MODE_4BIT,
+       .voltages       = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .version        = MMC_CTLR_VERSION_2,
+};
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+static struct davinci_mmc mmc_sd1 = {
+       .reg_base       = (struct davinci_mmc_regs *)DAVINCI_MMC_SD1_BASE,
+       .input_clk      = 121500000,
+       .host_caps      = MMC_MODE_4BIT,
+       .voltages       = MMC_VDD_32_33 | MMC_VDD_33_34,
+       .version        = MMC_CTLR_VERSION_2,
+};
+#endif
+
+int board_mmc_init(bd_t *bis)
+{
+       int err;
+
+       /* Add slot-0 to mmc subsystem */
+       err = davinci_mmc_init(bis, &mmc_sd0);
+       if (err)
+               return err;
+
+#ifdef CONFIG_DAVINCI_MMC_SD1
+#define PUPDCTL1               0x01c4007c
+       /* PINMUX(4)-DAT0-3/CMD;  PINMUX(0)-CLK */
+       writel((readl(PINMUX4) | 0x55400000), PINMUX4);
+       writel((readl(PINMUX0) | 0x00010000), PINMUX0);
+
+       /* Configure MMC/SD pins as pullup */
+       writel((readl(PUPDCTL1) & ~0x07c0), PUPDCTL1);
+
+       /* Add slot-1 to mmc subsystem */
+       err = davinci_mmc_init(bis, &mmc_sd1);
+#endif
+
+       return err;
+}
+#endif