Merge branch 'mimc200' into next

[u-boot] / board / davinci / sffsdr / sffsdr.c

diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c
index 9296d7b634bb57fe58aa65765b88f72c969c56cc..e76f86d08cb6891773b300c7d43beebf6fa087bc 100644 (file)
--- a/board/davinci/sffsdr/sffsdr.c
+++ b/board/davinci/sffsdr/sffsdr.c
@@ -30,7 +30,6 @@
 #include <common.h>
 #include <i2c.h>
 #include <asm/arch/hardware.h>
-#include <asm/arch/emac_defs.h>
 #include "../common/psc.h"
 #include "../common/misc.h"
 
@@ -51,16 +50,9 @@ int board_init(void)
        /* address of boot parameters */
        gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
 
-       /* Workaround for TMS320DM6446 errata 1.3.22 */
-       REG(PSC_SILVER_BULLET) = 0;
+       davinci_errata_workarounds();
 
        /* Power on required peripherals */
-       lpsc_on(DAVINCI_LPSC_EMAC);
-       lpsc_on(DAVINCI_LPSC_EMAC_WRAPPER);
-       lpsc_on(DAVINCI_LPSC_MDIO);
-       lpsc_on(DAVINCI_LPSC_I2C);
-       lpsc_on(DAVINCI_LPSC_UART0);
-       lpsc_on(DAVINCI_LPSC_TIMER1);
        lpsc_on(DAVINCI_LPSC_GPIO);
 
 #if !defined(CONFIG_SYS_USE_DSPLINK)
@@ -68,24 +60,11 @@ int board_init(void)
        dsp_on();
 #endif /* CONFIG_SYS_USE_DSPLINK */
 
-       /* Bringup UART0 out of reset */
-       REG(UART0_PWREMU_MGMT) = 0x0000e003;
-
-       /* Enable GIO3.3V cells used for EMAC */
-       REG(VDD3P3V_PWDN) = 0;
-
-       /* Enable UART0 MUX lines */
-       REG(PINMUX1) |= 1;
-
-       /* Enable EMAC and AEMIF pins */
-       REG(PINMUX0) = 0x80000c1f;
-
-       /* Enable I2C pin Mux */
-       REG(PINMUX1) |= (1 << 7);
-
-       /* Set the Bus Priority Register to appropriate value */
-       REG(VBPR) = 0x20;
+       davinci_enable_uart0();
+       davinci_enable_emac();
+       davinci_enable_i2c();
 
+       lpsc_on(DAVINCI_LPSC_TIMER1);
        timer_init();
 
        return(0);