Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

[u-boot] / board / embest / mx6boards / mx6boards.c

diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c
index 530ea4f3c48d6205916977856d5f7f95f1be77f6..867459909df8fa0fda4ee943e8afb2cdeabeab2b 100644 (file)
--- a/board/embest/mx6boards/mx6boards.c
+++ b/board/embest/mx6boards/mx6boards.c
@@ -18,12 +18,13 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
 #include <asm/arch/mx6-pins.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
 #include <asm/gpio.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/boot_mode.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/video.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/spi.h>
+#include <asm/mach-imx/video.h>
 #include <i2c.h>
 #include <mmc.h>
 #include <fsl_esdhc.h>
@@ -215,12 +216,12 @@ int board_mmc_getcd(struct mmc *mmc)
 
 int board_mmc_init(bd_t *bis)
 {
-       s32 status = 0;
+       int ret;
        int i;
 
        /*
         * According to the board_mmc_init() the following map is done:
-        * (U-boot device node)    (Physical Port)
+        * (U-Boot device node)    (Physical Port)
         * ** RiOTboard :
         * mmc0                    SDCard slot (bottom)
         * mmc1                    uSDCard slot (top)
@@ -267,13 +268,15 @@ int board_mmc_init(bd_t *bis)
                        printf("Warning: you configured more USDHC controllers"
                               "(%d) then supported by the board (%d)\n",
                               i + 1, CONFIG_SYS_FSL_USDHC_NUM);
-                       return status;
+                       return -EINVAL;
                }
 
-               status |= fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+               ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
+               if (ret)
+                       return ret;
        }
 
-       return status;
+       return 0;
 }
 #endif
 
@@ -285,6 +288,11 @@ iomux_v3_cfg_t const ecspi1_pads[] = {
        MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+       return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1;
+}
+
 static void setup_spi(void)
 {
        imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));