Merge git://www.denx.de/git/u-boot

[u-boot] / board / esd / ash405 / ash405.c

diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c
index 22b38285995bca536abf25822bc1d390a2ac75dd..8a5b03bcedb3d35a8ac79e247028a2cb2f27dea8 100644 (file)
--- a/board/esd/ash405/ash405.c
+++ b/board/esd/ash405/ash405.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 #include <malloc.h>
 
@@ -33,6 +34,7 @@
 #endif
 
 extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+extern void lxt971_no_sleep(void);
 
 /* fpga configuration data - gzip compressed and generated by bin2c */
 const unsigned char fpgadata[] =
@@ -47,7 +49,7 @@ const unsigned char fpgadata[] =
 
 
 /* Prototypes */
-int gunzip(void *, int, unsigned char *, int *);
+int gunzip(void *, int, unsigned char *, unsigned long *);
 
 
 int board_early_init_f (void)
@@ -102,7 +104,7 @@ int misc_init_r (void)
        int i;
 
        dst = malloc(CFG_FPGA_MAX_SIZE);
-       if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, (int *)&len) != 0) {
+       if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
                printf ("GUNZIP ERROR - must RESET board to recover\n");
                do_reset (NULL, 0, 0, NULL);
        }
@@ -164,17 +166,11 @@ int misc_init_r (void)
        /*
         * Reset external DUARTs
         */
-       out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
        udelay(10); /* wait 10us */
-       out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+       out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
        udelay(1000); /* wait 1ms */
 
-       /*
-        * Set NAND-FLASH GPIO signals to default
-        */
-       out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-       out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
-
        /*
         * Enable interrupts in exar duart mcr[3]
         */
@@ -193,7 +189,7 @@ int misc_init_r (void)
 
 int checkboard (void)
 {
-       unsigned char str[64];
+       char str[64];
        int i = getenv_r ("serial#", str, sizeof(str));
 
        puts ("Board: ");
@@ -218,35 +214,17 @@ long int initdram (int board_type)
        mtdcr(memcfga, mem_mb0cf);
        val = mfdcr(memcfgd);
 
-#if 0
-       printf("\nmb0cf=%x\n", val); /* test-only */
-       printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
        return (4*1024*1024 << ((val & 0x000e0000) >> 17));
 }
 
 /* ------------------------------------------------------------------------- */
 
-int testdram (void)
+void reset_phy(void)
 {
-       /* TODO: XXX XXX XXX */
-       printf ("test: 16 MB - ok\n");
-
-       return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#include <linux/mtd/nand.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
-       nand_probe(CFG_NAND_BASE);
-       if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
-               print_size(nand_dev_desc[0].totlen, "\n");
-       }
-}
+#ifdef CONFIG_LXT971_NO_SLEEP
+       /*
+        * Disable sleep mode in LXT971
+        */
+       lxt971_no_sleep();
 #endif
+}