Merge branch 'master' of git://www.denx.de/git/u-boot-avr32

[u-boot] / board / esd / hh405 / hh405.c

diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index 958af8f755869802affc9de61af7af85147e9d42..802491a313a1afad43d20fe274b1d8d3c6f75ae4 100644 (file)
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -5,7 +5,7 @@
  * (C) Copyright 2005
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * (C) Copyright 2006
+ * (C) Copyright 2006-2007
  * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com
  *
  * See file CREDITS for list of people who contributed to this
@@ -34,6 +34,8 @@
 #include <pci.h>
 #include <sm501.h>
 
+DECLARE_GLOBAL_DATA_PTR;
+
 #ifdef CONFIG_VIDEO_SM501
 
 #define SWAP32(x)       ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
@@ -358,8 +360,6 @@ int board_early_init_f (void)
 
 int cf_enable(void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        int i;
 
        volatile unsigned short *fpga_ctrl =
@@ -391,8 +391,6 @@ int cf_enable(void)
 
 int misc_init_r (void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        volatile unsigned short *fpga_ctrl =
                (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
        volatile unsigned short *lcd_contrast =
@@ -473,17 +471,11 @@ int misc_init_r (void)
         */
        *fpga_ctrl |= gd->board_type & 0x0003;
 
-       /*
+       /*
         * Setup and enable EEPROM write protection
         */
        out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP);
 
-       /*
-        * Set NAND-FLASH GPIO signals to default
-        */
-       out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
-       out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
-
        /*
         * Reset touch-screen controller
         */
@@ -628,8 +620,6 @@ int misc_init_r (void)
 
 int checkboard (void)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        char str[64];
        int i = getenv_r ("serial#", str, sizeof(str));
 
@@ -654,7 +644,7 @@ int checkboard (void)
 }
 
 
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
 {
        unsigned long val;
 
@@ -673,8 +663,6 @@ long int initdram (int board_type)
 #ifdef CONFIG_IDE_RESET
 void ide_set_reset(int on)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        volatile unsigned short *fpga_mode =
                (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL);
        volatile unsigned short *fpga_status =
@@ -696,20 +684,6 @@ void ide_set_reset(int on)
 #endif /* CONFIG_IDE_RESET */
 
 
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#include <linux/mtd/nand.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
-{
-       nand_probe(CFG_NAND_BASE);
-       if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
-               print_size(nand_dev_desc[0].totlen, "\n");
-       }
-}
-#endif
-
-
 #if defined(CFG_EEPROM_WREN)
 /* Input: <dev_addr>  I2C address of EEPROM device to enable.
  *         <state>     -1: deliver current state
@@ -788,8 +762,6 @@ U_BOOT_CMD(eepwren, 2,      0,      do_eep_wren,
  */
 void video_get_info_str (int line_number, char *info)
 {
-       DECLARE_GLOBAL_DATA_PTR;
-
        char str[64];
        char str2[64];
        int i = getenv_r("serial#", str2, sizeof(str));