#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
#define FPGA_DEBUG
#endif
+DECLARE_GLOBAL_DATA_PTR;
+
extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
extern void lxt971_no_sleep(void);
au_image_t au_image[] = {
{"plu405/preinst.img", 0, -1, AU_SCRIPT},
{"plu405/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE},
- {"plu405/pImage_$(bd_type)", 0x00000000, 0x00100000, AU_NAND},
+ {"plu405/pImage_${bd_type}", 0x00000000, 0x00100000, AU_NAND},
{"plu405/pImage.initrd", 0x00100000, 0x00200000, AU_NAND},
{"plu405/yaffsmt2.img", 0x00300000, 0x01c00000, AU_NAND},
{"plu405/postinst.img", 0, 0, AU_SCRIPT},
int index;
int i;
+ /* adjust flash start and offset */
+ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
+ gd->bd->bi_flashoffset = 0;
+
dst = malloc(CFG_FPGA_MAX_SIZE);
if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) {
printf ("GUNZIP ERROR - must RESET board to recover\n");
/*
* Reset external DUARTs
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST);
udelay(10); /* wait 10us */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */
+ out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST);
udelay(1000); /* wait 1ms */
- /*
- * Set NAND-FLASH GPIO signals to default
- */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE));
- out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE);
-
/*
* Enable interrupts in exar duart mcr[3]
*/
*/
int checkboard (void)
{
- unsigned char str[64];
+ char str[64];
int i = getenv_r ("serial#", str, sizeof(str));
puts ("Board: ");
}
putc ('\n');
-
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-
return 0;
}
mtdcr(memcfga, mem_mb0cf);
val = mfdcr(memcfgd);
-#if 0
- printf("\nmb0cf=%x\n", val); /* test-only */
- printf("strap=%x\n", mfdcr(strap)); /* test-only */
-#endif
-
return (4*1024*1024 << ((val & 0x000e0000) >> 17));
}
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: 16 MB - ok\n");
-
- return (0);
-}
-
-
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
#endif /* CONFIG_IDE_RESET */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-#include <linux/mtd/nand.h>
-extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE];
-
-void nand_init(void)
+void reset_phy(void)
{
- nand_probe(CFG_NAND_BASE);
- if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) {
- print_size(nand_dev_desc[0].totlen, "\n");
- }
-}
-#endif
+#ifdef CONFIG_LXT971_NO_SLEEP
-
-#ifdef CONFIG_AUTO_UPDATE_SHOW
-void board_auto_update_show(int au_active)
-{
- if (au_active) {
- printf("\n Dies ist die board-funktion: Updating!!!\n");
- } else {
- printf("\n Dies ist die board-funktion: Updating done!!!\n");
- }
-}
+ /*
+ * Disable sleep mode in LXT971
+ */
+ lxt971_no_sleep();
#endif
+}