Merge branch 'evk1100-prep'

[u-boot] / board / esd / pmc440 / pmc440.c

diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 4d81c33a82471f1702f33492397f381bb90b6eac..2ab944ddf0eeada521484155ad71e8afa244bb32 100644 (file)
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -107,31 +107,31 @@ int board_early_init_f(void)
         * Setup the GPIO pins
         * TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
         */
-       out32(GPIO0_OR,    0x40000002);
-       out32(GPIO0_TCR,   0x4c90011f);
-       out32(GPIO0_OSRL,  0x28051400);
-       out32(GPIO0_OSRH,  0x55005000);
-       out32(GPIO0_TSRL,  0x08051400);
-       out32(GPIO0_TSRH,  0x55005000);
-       out32(GPIO0_ISR1L, 0x54000000);
-       out32(GPIO0_ISR1H, 0x00000000);
-       out32(GPIO0_ISR2L, 0x44000000);
-       out32(GPIO0_ISR2H, 0x00000100);
-       out32(GPIO0_ISR3L, 0x00000000);
-       out32(GPIO0_ISR3H, 0x00000000);
-
-       out32(GPIO1_OR,    0x80002408);
-       out32(GPIO1_TCR,   0xd6003c08);
-       out32(GPIO1_OSRL,  0x0a5a0000);
-       out32(GPIO1_OSRH,  0x00000000);
-       out32(GPIO1_TSRL,  0x00000000);
-       out32(GPIO1_TSRH,  0x00000000);
-       out32(GPIO1_ISR1L, 0x00005555);
-       out32(GPIO1_ISR1H, 0x40000000);
-       out32(GPIO1_ISR2L, 0x04010000);
-       out32(GPIO1_ISR2H, 0x00000000);
-       out32(GPIO1_ISR3L, 0x01400000);
-       out32(GPIO1_ISR3H, 0x00000000);
+       out_be32((void *)GPIO0_OR,    0x40000102);
+       out_be32((void *)GPIO0_TCR,   0x4c90011f);
+       out_be32((void *)GPIO0_OSRL,  0x28051400);
+       out_be32((void *)GPIO0_OSRH,  0x55005000);
+       out_be32((void *)GPIO0_TSRL,  0x08051400);
+       out_be32((void *)GPIO0_TSRH,  0x55005000);
+       out_be32((void *)GPIO0_ISR1L, 0x54000000);
+       out_be32((void *)GPIO0_ISR1H, 0x00000000);
+       out_be32((void *)GPIO0_ISR2L, 0x44000000);
+       out_be32((void *)GPIO0_ISR2H, 0x00000100);
+       out_be32((void *)GPIO0_ISR3L, 0x00000000);
+       out_be32((void *)GPIO0_ISR3H, 0x00000000);
+
+       out_be32((void *)GPIO1_OR,    0x80002408);
+       out_be32((void *)GPIO1_TCR,   0xd6003c08);
+       out_be32((void *)GPIO1_OSRL,  0x0a5a0000);
+       out_be32((void *)GPIO1_OSRH,  0x00000000);
+       out_be32((void *)GPIO1_TSRL,  0x00000000);
+       out_be32((void *)GPIO1_TSRH,  0x00000000);
+       out_be32((void *)GPIO1_ISR1L, 0x00005555);
+       out_be32((void *)GPIO1_ISR1H, 0x40000000);
+       out_be32((void *)GPIO1_ISR2L, 0x04010000);
+       out_be32((void *)GPIO1_ISR2H, 0x00000000);
+       out_be32((void *)GPIO1_ISR3L, 0x01400000);
+       out_be32((void *)GPIO1_ISR3H, 0x00000000);
 
        /* patch PLB:PCI divider for 66MHz PCI */
        mfcpr(clk_spcid, reg);
@@ -804,17 +804,20 @@ int eeprom_write_enable(unsigned dev_addr, int state)
                switch (state) {
                case 1:
                        /* Enable write access, clear bit GPIO_SINT2. */
-                       out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP);
+                       out_be32((void *)GPIO0_OR,
+                             in_be32((void *)GPIO0_OR) & ~GPIO0_EP_EEP);
                        state = 0;
                        break;
                case 0:
                        /* Disable write access, set bit GPIO_SINT2. */
-                       out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP);
+                       out_be32((void *)GPIO0_OR,
+                                in_be32((void *)GPIO0_OR) | GPIO0_EP_EEP);
                        state = 0;
                        break;
                default:
                        /* Read current status back. */
-                       state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP));
+                       state = (0 == (in_be32((void *)GPIO0_OR)
+                                      & GPIO0_EP_EEP));
                        break;
                }
        }