Switch from archive libraries to partial linking

[u-boot] / board / esd / tasreg / tasreg.c

diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 80ff2376b881d1ca6e7ef10d9e82af95691420b8..270caac08cfcf34af23b2eea3a14c67101b5721d 100644 (file)
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -25,11 +25,11 @@
 #include <command.h>
 #include <malloc.h>
 #include <asm/m5249.h>
+#include <asm/io.h>
 
 
 /* Prototypes */
-int gunzip(void *, int, unsigned char *, unsigned long *);
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
+int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
 int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len);
 int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len);
 
@@ -118,7 +118,7 @@ phys_size_t initdram (int board_type) {
 
        /** Precharge sequence **/
        mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */
-       *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */
+       out_be32((void *)0, junk); /* write to a memory location to init. precharge */
        udelay(0x10); /* Allow several Precharge cycles */
 
        /** Refresh Sequence **/
@@ -127,7 +127,7 @@ phys_size_t initdram (int board_type) {
 
        /** Mode Register initialization **/
        mbar_writeLong(MCFSIM_DACR0, 0x0000b364);  /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
-       *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
+       out_be32((void *)0x800, junk); /* Access RAM to initialize the mode register */
 
        return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
 };
@@ -219,7 +219,7 @@ int i2c_probe(uchar addr);
 
 /*
  */
-int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        ulong addr;
 
@@ -230,7 +230,7 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
        addr = simple_strtol (argv[1], NULL, 16);
 
-       printf("iprobe looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
+       printf("i2c probe looping on addr 0x%lx (cntrl-c aborts)...\n", addr);
 
        for (;;) {
                i2c_probe(addr);
@@ -248,17 +248,17 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 U_BOOT_CMD(
        iploop, 2,      1,      do_iploop,
-       "iprobe loop <addr>",
-       NULL
-       );
+       "i2c probe loop <addr>",
+       ""
+);
 
 /*
  */
-int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        uchar buf[8];
 
-       *(volatile ushort *)0xe0000000 = 0x4000;
+       out_be16((void *)0xe0000000, 0x4000);
 
        udelay(5000); /* wait for 5ms */
 
@@ -302,12 +302,12 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        codec,  1,      1,      do_codec,
        "Enable codec",
-       NULL
-       );
+       ""
+);
 
 /*
  */
-int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        ulong addr;
        ulong instr;
@@ -335,12 +335,12 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        saa,    5,      1,      do_saa,
        "Write to SAA1064 <addr> <instr> <cntrl> <data>",
-       NULL
-       );
+       ""
+);
 
 /*
  */
-int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        ulong addr;
        ulong data0;
@@ -374,12 +374,12 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        iwrite, 6,      1,      do_iwrite,
        "Write n bytes to I2C-device",
-       "addr cnt data0 ... datan\n"
-       );
+       "addr cnt data0 ... datan"
+);
 
 /*
  */
-int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        ulong addr;
        ulong cnt;
@@ -406,12 +406,12 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        iread,  3,      1,      do_iread,
        "Read from I2C <addr> <cnt>",
-       NULL
-       );
+       ""
+);
 
 /*
  */
-int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        ulong addr;
        uchar buf[32];
@@ -444,6 +444,6 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        ireadl, 2,      1,      do_ireadl,
        "Read-loop from I2C <addr>",
-       NULL
-       );
+       ""
+);
 #endif