armv8/ls2080ardb: Enable VID support

[u-boot] / board / freescale / common / pfuze.c

diff --git a/board/freescale/common/pfuze.c b/board/freescale/common/pfuze.c
index 4980bf7b0089528db6f0dc5a4c45d4db99d4eaa5..69afa835623a30109014497a38b94f621df4f7de 100644 (file)
--- a/board/freescale/common/pfuze.c
+++ b/board/freescale/common/pfuze.c
@@ -9,10 +9,12 @@
 #include <power/pmic.h>
 #include <power/pfuze100_pmic.h>
 
+#ifndef CONFIG_DM_PMIC_PFUZE100
 int pfuze_mode_init(struct pmic *p, u32 mode)
 {
        unsigned char offset, i, switch_num;
-       u32 id, ret;
+       u32 id;
+       int ret;
 
        pmic_reg_read(p, PFUZE100_DEVICEID, &id);
        id = id & 0xf;
@@ -71,10 +73,10 @@ struct pmic *pfuze_common_init(unsigned char i2cbus)
        pmic_reg_write(p, PFUZE100_SW1ABSTBY, reg);
 
        /* Set SW1AB/VDDARM step ramp up time from 16us to 4us/25mV */
-       pmic_reg_read(p, PUZE_100_SW1ABCONF, &reg);
+       pmic_reg_read(p, PFUZE100_SW1ABCONF, &reg);
        reg &= ~SW1xCONF_DVSSPEED_MASK;
        reg |= SW1xCONF_DVSSPEED_4US;
-       pmic_reg_write(p, PUZE_100_SW1ABCONF, reg);
+       pmic_reg_write(p, PFUZE100_SW1ABCONF, reg);
 
        /* Set SW1C standby voltage to 0.975V */
        pmic_reg_read(p, PFUZE100_SW1CSTBY, &reg);
@@ -90,3 +92,4 @@ struct pmic *pfuze_common_init(unsigned char i2cbus)
 
        return p;
 }
+#endif