tegra: enable NAND on Harmony

[u-boot] / board / freescale / common / sys_eeprom.c

diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c
index 3ecfb06cc84d5a7a85973f03a7c256b2362d0740..d2ed0361e246f05041e92d890675436135c0c016 100644 (file)
--- a/board/freescale/common/sys_eeprom.c
+++ b/board/freescale/common/sys_eeprom.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2006, 2008-2009 Freescale Semiconductor
+ * Copyright 2006, 2008-2009, 2011 Freescale Semiconductor
  * York Sun (yorksun@freescale.com)
  * Haiying Wang (haiying.wang@freescale.com)
  * Timur Tabi (timur@freescale.com)
@@ -34,12 +34,6 @@
 #endif
 
 #ifdef CONFIG_SYS_I2C_EEPROM_NXID
-#define MAX_NUM_PORTS  8
-#define NXID_VERSION   0
-#endif
-
-#ifdef CONFIG_SYS_I2C_EEPROM_NXID_1
-#define CONFIG_SYS_I2C_EEPROM_NXID
 #define MAX_NUM_PORTS  23
 #define NXID_VERSION   1
 #endif
@@ -428,11 +422,16 @@ int do_mac(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
  * This ensures that any user-saved variables are never overwritten.
  *
  * This function must be called after relocation.
+ *
+ * For NXID v1 EEPROMs, we support loading and up-converting the older NXID v0
+ * format.  In a v0 EEPROM, there are only eight MAC addresses and the CRC is
+ * located at a different offset.
  */
 int mac_read_from_eeprom(void)
 {
        unsigned int i;
-       u32 crc;
+       u32 crc, crc_offset = offsetof(struct eeprom, crc);
+       u32 *crcp; /* Pointer to the CRC in the data read from the EEPROM */
 
        puts("EEPROM: ");
 
@@ -447,12 +446,32 @@ int mac_read_from_eeprom(void)
                return -1;
        }
 
-       crc = crc32(0, (void *)&e, sizeof(e) - 4);
-       if (crc != be32_to_cpu(e.crc)) {
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
+       /*
+        * If we've read an NXID v0 EEPROM, then we need to set the CRC offset
+        * to where it is in v0.
+        */
+       if (e.version == 0)
+               crc_offset = 0x72;
+#endif
+
+       crc = crc32(0, (void *)&e, crc_offset);
+       crcp = (void *)&e + crc_offset;
+       if (crc != be32_to_cpu(*crcp)) {
                printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc));
                return -1;
        }
 
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
+       /*
+        * MAC address #9 in v1 occupies the same position as the CRC in v0.
+        * Erase it so that it's not mistaken for a MAC address.  We'll
+        * update the CRC later.
+        */
+       if (e.version == 0)
+               memset(e.mac[8], 0xff, 6);
+#endif
+
        for (i = 0; i < min(e.mac_count, MAX_NUM_PORTS); i++) {
                if (memcmp(&e.mac[i], "\0\0\0\0\0\0", 6) &&
                    memcmp(&e.mac[i], "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
@@ -482,6 +501,17 @@ int mac_read_from_eeprom(void)
        printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]);
 #endif
 
+#ifdef CONFIG_SYS_I2C_EEPROM_NXID
+       /*
+        * Now we need to upconvert the data into v1 format.  We do this last so
+        * that at boot time, U-Boot will still say "NXID v0".
+        */
+       if (e.version == 0) {
+               e.version = NXID_VERSION;
+               update_crc();
+       }
+#endif
+
        return 0;
 }