SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / board / freescale / ls1043aqds / ls1043aqds.c

diff --git a/board/freescale/ls1043aqds/ls1043aqds.c b/board/freescale/ls1043aqds/ls1043aqds.c
index b7e9c2172773fff279ee18b9f60bb50247584003..4fba57242bc2284844955449a12d7f2faf2b4765 100644 (file)
--- a/board/freescale/ls1043aqds/ls1043aqds.c
+++ b/board/freescale/ls1043aqds/ls1043aqds.c
@@ -1,23 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright 2015 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <i2c.h>
 #include <fdt_support.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/fsl_serdes.h>
+#include <asm/arch/ppa.h>
 #include <asm/arch/fdt.h>
+#include <asm/arch/mmu.h>
 #include <asm/arch/soc.h>
 #include <ahci.h>
 #include <hwconfig.h>
 #include <mmc.h>
 #include <scsi.h>
 #include <fm_eth.h>
-#include <fsl_csu.h>
 #include <fsl_esdhc.h>
 #include <fsl_ifc.h>
 #include <spl.h>
@@ -153,7 +154,11 @@ int dram_init(void)
         * before accessing DDR SPD.
         */
        select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
-       gd->ram_size = initdram(0);
+       fsl_initdram();
+#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
+       /* This will break-before-make MMU for DDR */
+       update_early_mmu_table();
+#endif
 
        return 0;
 }
@@ -309,6 +314,10 @@ int misc_init_r(void)
 
 int board_init(void)
 {
+#ifdef CONFIG_SYS_FSL_ERRATUM_A010315
+       erratum_a010315();
+#endif
+
        select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
        board_retimer_init();
 
@@ -316,9 +325,10 @@ int board_init(void)
        config_serdes_mux();
 #endif
 
-#ifdef CONFIG_LAYERSCAPE_NS_ACCESS
-       enable_layerscape_ns_access();
+#ifdef CONFIG_FSL_LS_PPA
+       ppa_init();
 #endif
+
        return 0;
 }
 
@@ -327,6 +337,7 @@ int ft_board_setup(void *blob, bd_t *bd)
 {
        u64 base[CONFIG_NR_DRAM_BANKS];
        u64 size[CONFIG_NR_DRAM_BANKS];
+       u8 reg;
 
        /* fixup DT for the two DDR banks */
        base[0] = gd->bd->bi_dram[0].start;
@@ -341,6 +352,15 @@ int ft_board_setup(void *blob, bd_t *bd)
        fdt_fixup_fman_ethernet(blob);
        fdt_fixup_board_enet(blob);
 #endif
+
+       reg = QIXIS_READ(brdcfg[0]);
+       reg = (reg & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+       /* Disable IFC if QSPI is enabled */
+       if (reg == 0xF)
+               do_fixup_by_compat(blob, "fsl,ifc",
+                                  "status", "disabled", 8 + 1, 1);
+
        return 0;
 }
 #endif