#include <fm_eth.h>
#include <i2c.h>
#include <miiphy.h>
+#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/ldpaa_wriop.h>
#include "../common/qixis.h"
#include "ls2080aqds_qixis.h"
+#define MC_BOOT_ENV_VAR "mcinitcmd"
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
};
/* Slot2 does not have EMI connections */
-#define EMI_NONE 0xFFFFFFFF
+#define EMI_NONE 0xFF
#define EMI1_SLOT1 0
#define EMI1_SLOT2 1
#define EMI1_SLOT3 2
mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id);
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac],
+ 0x1f, 0);
continue;
}
if (ret > 0)
goto error;
- mdelay(1);
+ mdelay(100);
ret = miiphy_read(dev[mii_bus],
riser_phy_addr[dpmac],
0x11, &value);
if (ret > 0)
goto error;
- mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d :PHY is configured ",
dpmac_id);
printf("after setting repeater 0x%x\n",
value);
i = 5;
j = 5;
- } else
+ } else {
printf("DPMAC %d :PHY is failed to ",
dpmac_id);
printf("configure the repeater 0x%x\n",
value);
}
+ }
}
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f, 0);
}
error:
if (ret)
bus->read = ls2080a_qds_mdio_read;
bus->write = ls2080a_qds_mdio_write;
bus->reset = ls2080a_qds_mdio_reset;
- sprintf(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval));
+ strcpy(bus->name, ls2080a_qds_mdio_name_for_muxval(muxval));
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
switch (serdes1_prtcl) {
case 0x07:
}
break;
+ case 0x39:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI1_SLOT3;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI1_SLOT3;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
+ case 0x4D:
+ printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
+ serdes1_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm1[0] = EMI1_SLOT3;
+ lane_to_slot_fsm1[1] = EMI1_SLOT3;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ } else {
+ lane_to_slot_fsm1[0] = EMI_NONE;
+ lane_to_slot_fsm1[1] = EMI_NONE;
+ lane_to_slot_fsm1[2] = EMI_NONE;
+ lane_to_slot_fsm1[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm1[4] = EMI1_SLOT3;
+ lane_to_slot_fsm1[5] = EMI1_SLOT3;
+ lane_to_slot_fsm1[6] = EMI_NONE;
+ lane_to_slot_fsm1[7] = EMI_NONE;
+ break;
+
case 0x2A:
+ case 0x4B:
+ case 0x4C:
printf("qds: WRIOP: Supported SerDes1 Protocol 0x%02x\n",
serdes1_prtcl);
break;
lane_to_slot_fsm2[7] = EMI1_SLOT6;
}
break;
+
+ case 0x47:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI1_SLOT5;
+ lane_to_slot_fsm2[2] = EMI1_SLOT5;
+ lane_to_slot_fsm2[3] = EMI1_SLOT5;
+
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI1_SLOT5;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ }
+ break;
+
+ case 0x57:
+ printf("qds: WRIOP: Supported SerDes2 Protocol 0x%02x\n",
+ serdes2_prtcl);
+ if (hwconfig_f("xqsgmii", env_hwconfig)) {
+ lane_to_slot_fsm2[0] = EMI_NONE;
+ lane_to_slot_fsm2[1] = EMI_NONE;
+ lane_to_slot_fsm2[2] = EMI_NONE;
+ lane_to_slot_fsm2[3] = EMI_NONE;
+ }
+ lane_to_slot_fsm2[4] = EMI_NONE;
+ lane_to_slot_fsm2[5] = EMI_NONE;
+ lane_to_slot_fsm2[6] = EMI1_SLOT5;
+ lane_to_slot_fsm2[7] = EMI1_SLOT5;
+ break;
+
default:
printf(" %s qds: WRIOP: Unsupported SerDes2 Protocol 0x%02x\n",
__func__ , serdes2_prtcl);
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
int *riser_phy_addr;
- char *env_hwconfig = getenv("hwconfig");
+ char *env_hwconfig = env_get("hwconfig");
if (hwconfig_f("xqsgmii", env_hwconfig))
riser_phy_addr = &xqsgii_riser_phy_addr[0];
switch (serdes1_prtcl) {
case 0x07:
+ case 0x39:
+ case 0x4D:
+ lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id - 1);
- lane = serdes_get_first_lane(FSL_SRDS_1, SGMII1 + dpmac_id);
slot = lane_to_slot_fsm1[lane];
switch (++slot) {
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
bus = mii_dev_for_muxval(EMI1_SLOT1);
wriop_set_mdio(dpmac_id, bus);
- dpmac_info[dpmac_id].phydev = phy_connect(
- dpmac_info[dpmac_id].bus,
- dpmac_info[dpmac_id].phy_addr,
- NULL,
- dpmac_info[dpmac_id].enet_if);
- phy_config(dpmac_info[dpmac_id].phydev);
break;
case 2:
/* Slot housing a SGMII riser card? */
dpmac_info[dpmac_id].board_mux = EMI1_SLOT2;
bus = mii_dev_for_muxval(EMI1_SLOT2);
wriop_set_mdio(dpmac_id, bus);
- dpmac_info[dpmac_id].phydev = phy_connect(
- dpmac_info[dpmac_id].bus,
- dpmac_info[dpmac_id].phy_addr,
- NULL,
- dpmac_info[dpmac_id].enet_if);
- phy_config(dpmac_info[dpmac_id].phydev);
break;
case 3:
+ if (slot == EMI_NONE)
+ return;
+ if (serdes1_prtcl == 0x39) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 6 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 2]);
+ if (dpmac_id >= 7 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 3]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT3;
+ bus = mii_dev_for_muxval(EMI1_SLOT3);
+ wriop_set_mdio(dpmac_id, bus);
break;
case 4:
break;
case 0x07:
case 0x08:
case 0x49:
+ case 0x47:
+ case 0x57:
lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
(dpmac_id - 9));
slot = lane_to_slot_fsm2[lane];
dpmac_info[dpmac_id].board_mux = EMI1_SLOT4;
bus = mii_dev_for_muxval(EMI1_SLOT4);
wriop_set_mdio(dpmac_id, bus);
- dpmac_info[dpmac_id].phydev = phy_connect(
- dpmac_info[dpmac_id].bus,
- dpmac_info[dpmac_id].phy_addr,
- NULL,
- dpmac_info[dpmac_id].enet_if);
- phy_config(dpmac_info[dpmac_id].phydev);
break;
case 5:
- break;
+ if (slot == EMI_NONE)
+ return;
+ if (serdes2_prtcl == 0x47) {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 10]);
+ if (dpmac_id >= 14 && hwconfig_f("xqsgmii",
+ env_hwconfig))
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ } else {
+ wriop_set_phy_address(dpmac_id,
+ riser_phy_addr[dpmac_id - 11]);
+ }
+ dpmac_info[dpmac_id].board_mux = EMI1_SLOT5;
+ bus = mii_dev_for_muxval(EMI1_SLOT5);
+ wriop_set_mdio(dpmac_id, bus);
+ break;
case 6:
/* Slot housing a SGMII riser card? */
wriop_set_phy_address(dpmac_id,
dpmac_info[dpmac_id].board_mux = EMI1_SLOT1;
bus = mii_dev_for_muxval(EMI1_SLOT1);
wriop_set_mdio(dpmac_id, bus);
- dpmac_info[dpmac_id].phydev = phy_connect(
- dpmac_info[dpmac_id].bus,
- dpmac_info[dpmac_id].phy_addr,
- NULL,
- dpmac_info[dpmac_id].enet_if);
-
- phy_config(dpmac_info[dpmac_id].phydev);
break;
case 3:
break;
switch (serdes1_prtcl) {
case 0x2A:
+ case 0x4B:
+ case 0x4C:
/*
- * XFI does not need a PHY to work, but to avoid U-boot use
+ * XFI does not need a PHY to work, but to avoid U-Boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
int board_eth_init(bd_t *bis)
{
int error;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
unsigned int i;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
initialize_dpmac_to_slot();
return error;
}
-#ifdef CONFIG_FSL_MC_ENET
-
-#endif
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+ mc_env_boot();
+}
+#endif /* CONFIG_RESET_PHY_R */
projects / u-boot / blobdiff