#include <fm_eth.h>
#include <i2c.h>
#include <miiphy.h>
+#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/ldpaa_wriop.h>
#include "../common/qixis.h"
#define MC_BOOT_ENV_VAR "mcinitcmd"
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
/* - In LS2080A there are only 16 SERDES lanes, spread across 2 SERDES banks.
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d:PHY is ..... Configured\n", dpmac_id);
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac],
+ 0x1f, 0);
continue;
}
if (ret > 0)
goto error;
- mdelay(1);
+ mdelay(100);
ret = miiphy_read(dev[mii_bus],
riser_phy_addr[dpmac],
0x11, &value);
if (ret > 0)
goto error;
- mdelay(10);
- if ((value & 0xfff) == 0x40f) {
+ if ((value & 0xfff) == 0x401) {
printf("DPMAC %d :PHY is configured ",
dpmac_id);
printf("after setting repeater 0x%x\n",
value);
i = 5;
j = 5;
- } else
+ } else {
printf("DPMAC %d :PHY is failed to ",
dpmac_id);
printf("configure the repeater 0x%x\n",
value);
}
+ }
}
+ miiphy_write(dev[mii_bus], riser_phy_addr[dpmac], 0x1f, 0);
}
error:
if (ret)
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
switch (serdes1_prtcl) {
case 0x07:
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
int *riser_phy_addr;
- char *env_hwconfig = getenv("hwconfig");
+ char *env_hwconfig = env_get("hwconfig");
if (hwconfig_f("xqsgmii", env_hwconfig))
riser_phy_addr = &xqsgii_riser_phy_addr[0];
int board_eth_init(bd_t *bis)
{
int error;
- char *mc_boot_env_var;
-#ifdef CONFIG_FSL_MC_ENET
+#if defined(CONFIG_FSL_MC_ENET) && !defined(CONFIG_SPL_BUILD)
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
unsigned int i;
char *env_hwconfig;
- env_hwconfig = getenv("hwconfig");
+ env_hwconfig = env_get("hwconfig");
initialize_dpmac_to_slot();
}
}
- mc_boot_env_var = getenv(MC_BOOT_ENV_VAR);
- if (mc_boot_env_var)
- run_command_list(mc_boot_env_var, -1, 0);
error = cpu_eth_init(bis);
if (hwconfig_f("xqsgmii", env_hwconfig)) {
return error;
}
-#ifdef CONFIG_FSL_MC_ENET
-
-#endif
+#if defined(CONFIG_RESET_PHY_R)
+void reset_phy(void)
+{
+ mc_env_boot();
+}
+#endif /* CONFIG_RESET_PHY_R */