#include <ioports.h>
#include <mpc83xx.h>
#include <i2c.h>
-#include <spd.h>
#include <miiphy.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
-#if defined(CONFIG_SPD_EEPROM)
#include <spd_sdram.h>
-#else
#include <asm/mmu.h>
-#endif
-#if defined(CONFIG_OF_FLAT_TREE)
-#include <ft_build.h>
-#elif defined(CONFIG_OF_LIBFDT)
+#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
#if defined(CONFIG_PQ_MDS_PIB)
/* Enable flash write */
bcsr[0xa] &= ~0x04;
- /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2 h/w bug workaround) */
- if (immr->sysconf.spridr == SPR_8360_REV20 ||
- immr->sysconf.spridr == SPR_8360E_REV20 ||
- immr->sysconf.spridr == SPR_8360_REV21 ||
- immr->sysconf.spridr == SPR_8360E_REV21)
+ /* Disable G1TXCLK, G2TXCLK h/w buffers (rev.2.x h/w bug workaround) */
+ if (REVID_MAJOR(immr->sysconf.spridr) == 2)
bcsr[0xe] = 0x30;
/* Enable second UART */
int fixed_sdram(void);
void sdram_init(void);
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
{
volatile immap_t *im = (immap_t *) CFG_IMMR;
u32 msize = 0;
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
{
-#if defined(CONFIG_OF_FLAT_TREE)
- u32 *p;
- int len;
-
- p = ft_get_prop(blob, "/memory/reg", &len);
- if (p != NULL) {
- *p++ = cpu_to_be32(bd->bi_memstart);
- *p = cpu_to_be32(bd->bi_memsize);
- }
-#endif
+ const immap_t *immr = (immap_t *)CFG_IMMR;
+
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
ft_pci_setup(blob, bd);
#endif
+ /*
+ * mpc8360ea pb mds errata 2: RGMII timing
+ * if on mpc8360ea rev. 2.1,
+ * change both ucc phy-connection-types from rgmii-id to rgmii-rxid
+ */
+ if ((REVID_MAJOR(immr->sysconf.spridr) == 2) &&
+ (REVID_MINOR(immr->sysconf.spridr) == 1)) {
+ int nodeoffset;
+ const char *prop;
+ int path;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ /* fixup UCC 1 if using rgmii-id mode */
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ /* fixup UCC 2 if using rgmii-id mode */
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path,
+ "phy-connection-type", 0);
+ if (prop && (strcmp(prop, "rgmii-id") == 0))
+ fdt_setprop(blob, path,
+ "phy-connection-type",
+ "rgmii-rxid",
+ sizeof("rgmii-rxid"));
+ }
+#endif
+ }
+ }
}
#endif