*/
#include <common.h>
+#include <hwconfig.h>
#include <i2c.h>
#include <asm/io.h>
+#include <asm/fsl_mpc83xx_serdes.h>
+#include <fdt_support.h>
#include <spd_sdram.h>
+#include <vsc7385.h>
+#include <fsl_esdhc.h>
-#if defined(CFG_DRAM_TEST)
+#if defined(CONFIG_SYS_DRAM_TEST)
int
testdram(void)
{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
+ uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+ uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
uint *p;
printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
+ CONFIG_SYS_MEMTEST_START,
+ CONFIG_SYS_MEMTEST_END);
printf("DRAM test phase 1:\n");
for (p = pstart; p < pend; p++)
}
#endif
-int board_early_init_f(void)
-{
- return 0;
-}
-
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
void ddr_enable_ecc(unsigned int dram_size);
#endif
int fixed_sdram(void);
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
{
- immap_t *im = (immap_t *) CFG_IMMR;
+ immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
u32 msize = 0;
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
msize = fixed_sdram();
#endif
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
/* Initialize DDR ECC byte */
ddr_enable_ecc(msize * 1024 * 1024);
#endif
************************************************************************/
int fixed_sdram(void)
{
- immap_t *im = (immap_t *) CFG_IMMR;
- u32 msize = CFG_DDR_SIZE * 1024 * 1024;
+ immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
+ u32 msize = CONFIG_SYS_DDR_SIZE * 1024 * 1024;
u32 msize_log2 = __ilog2(msize);
- im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
+ im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
- im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
+ im->sysconf.ddrcdr = CONFIG_SYS_DDRCDR_VALUE;
udelay(50000);
- im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
+ im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_SDRAM_CLK_CNTL;
udelay(1000);
- im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
- im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
+ im->ddr.csbnds[0].csbnds = CONFIG_SYS_DDR_CS0_BNDS;
+ im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
udelay(1000);
- im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
- im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
- im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
- im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
- im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
- im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
- im->ddr.sdram_mode = CFG_DDR_MODE;
- im->ddr.sdram_mode2 = CFG_DDR_MODE2;
- im->ddr.sdram_interval = CFG_DDR_INTERVAL;
+ im->ddr.timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ im->ddr.timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ im->ddr.sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG;
+ im->ddr.sdram_cfg2 = CONFIG_SYS_DDR_SDRAM_CFG2;
+ im->ddr.sdram_mode = CONFIG_SYS_DDR_MODE;
+ im->ddr.sdram_mode2 = CONFIG_SYS_DDR_MODE2;
+ im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
sync();
udelay(1000);
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
udelay(2000);
- return CFG_DDR_SIZE;
+ return CONFIG_SYS_DDR_SIZE;
}
-#endif /*!CFG_SPD_EEPROM */
+#endif /*!CONFIG_SYS_SPD_EEPROM */
int checkboard(void)
{
return 0;
}
+int board_early_init_f(void)
+{
+#ifdef CONFIG_FSL_SERDES
+ immap_t *immr = (immap_t *)CONFIG_SYS_IMMR;
+ u32 spridr = in_be32(&immr->sysconf.spridr);
+
+ /* we check only part num, and don't look for CPU revisions */
+ switch (PARTID_NO_E(spridr)) {
+ case SPR_8377:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8378:
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_PEX,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ case SPR_8379:
+ fsl_setup_serdes(CONFIG_FSL_SERDES1, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ fsl_setup_serdes(CONFIG_FSL_SERDES2, FSL_SERDES_PROTO_SATA,
+ FSL_SERDES_CLK_100, FSL_SERDES_VDD_1V);
+ break;
+ default:
+ printf("serdes not configured: unknown CPU part number: "
+ "%04x\n", spridr >> 16);
+ break;
+ }
+#endif /* CONFIG_FSL_SERDES */
+ return 0;
+}
+
+#ifdef CONFIG_FSL_ESDHC
+int board_mmc_init(bd_t *bd)
+{
+ struct immap __iomem *im = (struct immap __iomem *)CONFIG_SYS_IMMR;
+
+ if (!hwconfig("esdhc"))
+ return 0;
+
+ clrsetbits_be32(&im->sysconf.sicrl, SICRL_USB_B, SICRL_USB_B_SD);
+ clrsetbits_be32(&im->sysconf.sicrh, SICRH_SPI, SICRH_SPI_SD);
+
+ return fsl_esdhc_mmc_init(bd);
+}
+#endif
+
+/*
+ * Miscellaneous late-boot configurations
+ *
+ * If a VSC7385 microcode image is present, then upload it.
+*/
+int misc_init_r(void)
+{
+ int rc = 0;
+
+#ifdef CONFIG_VSC7385_IMAGE
+ if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE,
+ CONFIG_VSC7385_IMAGE_SIZE)) {
+ puts("Failure uploading VSC7385 microcode.\n");
+ rc = 1;
+ }
+#endif
+
+ return rc;
+}
+
#if defined(CONFIG_OF_BOARD_SETUP)
void ft_board_setup(void *blob, bd_t *bd)
ft_pci_setup(blob, bd);
#endif
ft_cpu_setup(blob, bd);
+ fdt_fixup_dr_usb(blob, bd);
+ fdt_fixup_esdhc(blob, bd);
}
#endif /* CONFIG_OF_BOARD_SETUP */