#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
-#include <asm/immap_fsl_pci.h>
+#include <asm/fsl_pci.h>
#include <asm/fsl_ddr_sdram.h>
#include <i2c.h>
#include <asm/io.h>
int misc_init_r(void)
{
u8 tmp_val, version;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
/*Do not use 8259PIC*/
- tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
- out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val | 0x80);
+ tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+ out_8(pixis_base + PIXIS_BRDCFG0, tmp_val | 0x80);
/*For FPGA V7 or higher, set the IRQMAPSEL to 0 to use MAP0 interrupt*/
- version = in8(PIXIS_BASE + PIXIS_PVER);
+ version = in_8(pixis_base + PIXIS_PVER);
if(version >= 0x07) {
- tmp_val = in8(PIXIS_BASE + PIXIS_BRDCFG0);
- out8(PIXIS_BASE + PIXIS_BRDCFG0, tmp_val & 0xbf);
+ tmp_val = in_8(pixis_base + PIXIS_BRDCFG0);
+ out_8(pixis_base + PIXIS_BRDCFG0, tmp_val & 0xbf);
}
/* Using this for DIU init before the driver in linux takes over
{
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
volatile ccsr_local_mcm_t *mcm = &immap->im_local_mcm;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
printf ("Board: MPC8610HPCD, System ID: 0x%02x, "
"System Version: 0x%02x, FPGA Version: 0x%02x\n",
- in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER),
- in8(PIXIS_BASE + PIXIS_PVER));
+ in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
+ in_8(pixis_base + PIXIS_PVER));
mcm->abcr |= 0x00010000; /* 0 */
mcm->hpmr3 = 0x80000008; /* 4c */
dram_size = fixed_sdram();
#endif
-#if defined(CONFIG_SYS_RAMBOOT)
- puts(" DDR: ");
- return dram_size;
-#endif
-
puts(" DDR: ");
return dram_size;
}
ddr->timing_cfg_0 = 0x00260802;
ddr->timing_cfg_1 = 0x3935d322;
ddr->timing_cfg_2 = 0x14904cc8;
- ddr->sdram_mode_1 = 0x00480432;
+ ddr->sdram_mode = 0x00480432;
ddr->sdram_mode_2 = 0x00000000;
ddr->sdram_interval = 0x06180fff; /* 0x06180100; */
ddr->sdram_data_init = 0xDEADBEEF;
udelay(500);
- ddr->sdram_cfg_1 = 0xc3000000; /* 0xe3008000;*/
+ ddr->sdram_cfg = 0xc3000000; /* 0xe3008000;*/
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
int first_free_busno = 0;
-extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
-extern void fsl_pci_init(struct pci_controller *hose);
-
void pci_init_board(void)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR;
struct pci_controller *hose = &pcie1_hose;
- int pcie_configured = (io_sel == 1) || (io_sel == 4);
- int pcie_ep = (host_agent == 0) || (host_agent == 2) ||
- (host_agent == 5);
+ int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
+ int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent);
struct pci_region *r = hose->regions;
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE1)) {
if (pci->pme_msg_det)
pci->pme_msg_det = 0xffffffff;
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE1_MEM_BUS,
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
- pci_setup_indirect(hose, (int)&pci->cfg_addr,
- (int)&pci->cfg_data);
- fsl_pci_init(hose);
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno = hose->last_busno + 1;
printf(" PCI-Express 1 on bus %02x - %02x\n",
struct pci_controller *hose = &pcie2_hose;
struct pci_region *r = hose->regions;
- int pcie_configured = (io_sel == 0) || (io_sel == 4);
- int pcie_ep = (host_agent == 0) || (host_agent == 1) ||
- (host_agent == 4);
+ int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel);
+ int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_2, host_agent);
if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIE2)) {
printf(" PCI-Express 2 connected to slot as %s" \
if (pci->pme_msg_det)
pci->pme_msg_det = 0xffffffff;
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCIE2_MEM_BUS,
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
- pci_setup_indirect(hose, (int)&pci->cfg_addr,
- (int)&pci->cfg_data);
- fsl_pci_init(hose);
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno = hose->last_busno + 1;
printf(" PCI-Express 2 on bus %02x - %02x\n",
{
volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
- int pci_agent = (host_agent >= 4) && (host_agent <= 6);
+ int pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent);
struct pci_region *r = hose->regions;
if ( !(devdisr & MPC86xx_DEVDISR_PCI1)) {
pci_agent ? "Agent" : "Host",
(uint)pci);
- /* inbound */
- r += fsl_pci_setup_inbound_windows(r);
-
/* outbound memory */
pci_set_region(r++,
CONFIG_SYS_PCI1_MEM_BUS,
hose->region_count = r - hose->regions;
hose->first_busno = first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr,
- (int) &pci->cfg_data);
- fsl_pci_init(hose);
+ fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
first_free_busno = hose->last_busno + 1;
printf(" PCI on bus %02x - %02x\n",
}
#if defined(CONFIG_OF_BOARD_SETUP)
-extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
- struct pci_controller *hose);
-
void
ft_board_setup(void *blob, bd_t *bd)
{
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "timebase-frequency", bd->bi_busfreq / 4, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "bus-frequency", bd->bi_busfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
- "clock-frequency", bd->bi_intfreq, 1);
- do_fixup_by_prop_u32(blob, "device_type", "soc", 4,
- "bus-frequency", bd->bi_busfreq, 1);
-
- do_fixup_by_compat_u32(blob, "ns16550",
- "clock-frequency", bd->bi_busfreq, 1);
-
- fdt_fixup_memory(blob, bd->bi_memstart, bd->bi_memsize);
+ ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI1
ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
{
u8 i;
ulong val = 0;
- ulong a;
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
- a = PIXIS_BASE + PIXIS_SPD;
- i = in8(a);
+ i = in_8(pixis_base + PIXIS_SPD);
i &= 0x07;
switch (i) {
void board_reset(void)
{
- out8(PIXIS_BASE + PIXIS_RST, 0);
+ u8 *pixis_base = (u8 *)PIXIS_BASE;
+
+ out_8(pixis_base + PIXIS_RST, 0);
while (1)
;