#include "../common/pixis.h"
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
long int fixed_sdram(void);
int board_early_init_f(void)
dram_size = fixed_sdram();
#endif
-#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_SYS_RAMBOOT)
puts(" DDR: ");
return dram_size;
#endif
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
-
puts(" DDR: ");
return dram_size;
}
long int
fixed_sdram(void)
{
-#if !defined(CFG_RAMBOOT)
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
+#if !defined(CONFIG_SYS_RAMBOOT)
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
- ddr->cs0_bnds = CFG_DDR_CS0_BNDS;
- ddr->cs0_config = CFG_DDR_CS0_CONFIG;
- ddr->timing_cfg_3 = CFG_DDR_TIMING_3;
- ddr->timing_cfg_0 = CFG_DDR_TIMING_0;
- ddr->timing_cfg_1 = CFG_DDR_TIMING_1;
- ddr->timing_cfg_2 = CFG_DDR_TIMING_2;
- ddr->sdram_mode_1 = CFG_DDR_MODE_1;
- ddr->sdram_mode_2 = CFG_DDR_MODE_2;
- ddr->sdram_interval = CFG_DDR_INTERVAL;
- ddr->sdram_data_init = CFG_DDR_DATA_INIT;
- ddr->sdram_clk_cntl = CFG_DDR_CLK_CTRL;
- ddr->sdram_ocd_cntl = CFG_DDR_OCD_CTRL;
- ddr->sdram_ocd_status = CFG_DDR_OCD_STATUS;
+ ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
+ ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
+ ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
+ ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
+ ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
+ ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
+ ddr->sdram_mode_1 = CONFIG_SYS_DDR_MODE_1;
+ ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
+ ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
+ ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
+ ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
+ ddr->sdram_ocd_cntl = CONFIG_SYS_DDR_OCD_CTRL;
+ ddr->sdram_ocd_status = CONFIG_SYS_DDR_OCD_STATUS;
#if defined (CONFIG_DDR_ECC)
ddr->err_disable = 0x0000008D;
#if defined (CONFIG_DDR_ECC)
/* Enable ECC checking */
- ddr->sdram_cfg_1 = (CFG_DDR_CONTROL | 0x20000000);
+ ddr->sdram_cfg_1 = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
#else
- ddr->sdram_cfg_1 = CFG_DDR_CONTROL;
- ddr->sdram_cfg_2 = CFG_DDR_CONTROL2;
+ ddr->sdram_cfg_1 = CONFIG_SYS_DDR_CONTROL;
+ ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
#endif
asm("sync; isync");
udelay(500);
#endif
- return CFG_SDRAM_SIZE * 1024 * 1024;
+ return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
int first_free_busno = 0;
+extern int fsl_pci_setup_inbound_windows(struct pci_region *r);
+extern void fsl_pci_init(struct pci_controller *hose);
void pci_init_board(void)
{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
volatile ccsr_gur_t *gur = &immap->im_gur;
uint devdisr = gur->devdisr;
uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
#ifdef CONFIG_PCI1
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
struct pci_controller *hose = &pci1_hose;
+ struct pci_region *r = hose->regions;
+
#ifdef DEBUG
uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
>> MPC8641_PORBMSR_HA_SHIFT;
debug("\n");
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_MEM_BASE,
+ CONFIG_SYS_PCI1_MEM_PHYS,
+ CONFIG_SYS_PCI1_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI1_IO_BASE,
+ CONFIG_SYS_PCI1_IO_PHYS,
+ CONFIG_SYS_PCI1_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
- in_be32((unsigned *) ((char *)(CFG_PCI1_MEM_BASE
- + CFG_PCI1_MEM_SIZE - 0x1000000)));
+ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_BASE
+ + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
} else {
puts("PCI-EXPRESS 1: Disabled\n");
#ifdef CONFIG_PCI2
{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
struct pci_controller *hose = &pci2_hose;
-
+ struct pci_region *r = hose->regions;
/* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
+ r += fsl_pci_setup_inbound_windows(r);
/* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI2_MEM_BASE,
- CFG_PCI2_MEM_PHYS,
- CFG_PCI2_MEM_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI2_MEM_BASE,
+ CONFIG_SYS_PCI2_MEM_PHYS,
+ CONFIG_SYS_PCI2_MEM_SIZE,
PCI_REGION_MEM);
/* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI2_IO_BASE,
- CFG_PCI2_IO_PHYS,
- CFG_PCI2_IO_SIZE,
+ pci_set_region(r++,
+ CONFIG_SYS_PCI2_IO_BASE,
+ CONFIG_SYS_PCI2_IO_PHYS,
+ CONFIG_SYS_PCI2_IO_SIZE,
PCI_REGION_IO);
- hose->region_count = 3;
+ hose->region_count = r - hose->regions;
hose->first_busno=first_free_busno;
pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
#if defined(CONFIG_OF_BOARD_SETUP)
+extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
+ struct pci_controller *hose);
void
ft_board_setup(void *blob, bd_t *bd)
{
- int node, tmp[2];
- const char *path;
-
ft_cpu_setup(blob, bd);
- node = fdt_path_offset(blob, "/aliases");
- tmp[0] = 0;
- if (node >= 0) {
#ifdef CONFIG_PCI1
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#endif
#ifdef CONFIG_PCI2
- path = fdt_getprop(blob, node, "pci1", NULL);
- if (path) {
- tmp[1] = pci2_hose.last_busno - pci2_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
#endif
- }
}
#endif
projects / u-boot / blobdiff