*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
mx25pdk_fec_init();
- ret = pmic_init(I2C_PMIC);
+ ret = pmic_init(I2C_0);
if (ret)
return ret;
if (!p)
return -ENODEV;
- /* Turn on Ethernet PHY supply */
- pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
+ /* Turn on Ethernet PHY and LCD supplies */
+ pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE | ONOFFA);
return 0;
}
imx_iomux_v3_setup_multiple_pads(sdhc1_pads, ARRAY_SIZE(sdhc1_pads));
+ /*
+ * Set the eSDHC1 PER clock to the maximum frequency lower than or equal
+ * to 50 MHz that can be obtained, which requires to use UPLL as the
+ * clock source. This actually gives 48 MHz.
+ */
+ imx_set_perclk(MXC_ESDHC1_CLK, true, 50000000);
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
return 0;
}
+
+/* Lowlevel init isn't used on mx25pdk, so just provide a dummy one here */
+void lowlevel_init(void) {}