powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board

[u-boot] / board / freescale / mx28evk / mx28evk.c

diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c
index 867d3c8518fb1dbf3c7a9f07595c33ff92df457c..6e719ffc39f84136c1e69b8a532781ae0d5fbbeb 100644 (file)
--- a/board/freescale/mx28evk/mx28evk.c
+++ b/board/freescale/mx28evk/mx28evk.c
@@ -49,8 +49,8 @@ int board_early_init_f(void)
 
        /* SSP0 clock at 96MHz */
        mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
-       /* SSP2 clock at 96MHz */
-       mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+       /* SSP2 clock at 160MHz */
+       mx28_set_sspclk(MXC_SSPCLK2, 160000, 0);
 
 #ifdef CONFIG_CMD_USB
        mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
@@ -100,19 +100,6 @@ int board_mmc_init(bd_t *bis)
 
 #ifdef CONFIG_CMD_NET
 
-#define        MII_OPMODE_STRAP_OVERRIDE       0x16
-#define        MII_PHY_CTRL1                   0x1e
-#define        MII_PHY_CTRL2                   0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
-       miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
-       miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
-       if (phy == 3)
-               miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
-       return 0;
-}
-
 int board_eth_init(bd_t *bis)
 {
        struct mxs_clkctrl_regs *clkctrl_regs =
@@ -152,24 +139,12 @@ int board_eth_init(bd_t *bis)
                return -EINVAL;
        }
 
-       ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-       if (ret) {
-               puts("FEC MXS: Unable to register FEC0 mii postcall\n");
-               return ret;
-       }
-
        dev = eth_get_dev_by_name("FEC1");
        if (!dev) {
                puts("FEC MXS: Unable to get FEC1 device entry\n");
                return -EINVAL;
        }
 
-       ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
-       if (ret) {
-               puts("FEC MXS: Unable to register FEC1 mii postcall\n");
-               return ret;
-       }
-
        return ret;
 }