Merge git://git.denx.de/u-boot-mpc85xx

[u-boot] / board / freescale / mx6sxsabresd / mx6sxsabresd.c

diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
index 97e9ed7df6c0ced4d249a403e7ee724825fe5f3d..0460cd9257b15196288a17cac35a130f9205f390 100644 (file)
--- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c
+++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c
@@ -27,7 +27,7 @@
 #include <power/pfuze100_pmic.h>
 #include "../common/pfuze.h"
 #include <usb.h>
-#include <usb/ehci-fsl.h>
+#include <usb/ehci-ci.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -64,7 +64,7 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int dram_init(void)
 {
-       gd->ram_size = PHYS_SDRAM_SIZE;
+       gd->ram_size = imx_ddr_size();
 
        return 0;
 }
@@ -348,7 +348,7 @@ int board_mmc_init(bd_t *bis)
 
        /*
         * According to the board_mmc_init() the following map is done:
-        * (U-boot device node)    (Physical Port)
+        * (U-Boot device node)    (Physical Port)
         * mmc0                    USDHC2
         * mmc1                    USDHC3
         * mmc2                    USDHC4
@@ -504,7 +504,7 @@ static iomux_v3_cfg_t const lcd_pads[] = {
 
 static int setup_lcd(void)
 {
-       enable_lcdif_clock(LCDIF1_BASE_ADDR);
+       enable_lcdif_clock(LCDIF1_BASE_ADDR, 1);
 
        imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads));
 
@@ -637,6 +637,8 @@ static void spl_dram_init(void)
                .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
                .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
                .ddr_type = DDR_TYPE_DDR3,
+               .refsel = 1,    /* Refresh cycles at 32KHz */
+               .refr = 7,      /* 8 refresh commands per refresh cycle */
        };
 
        mx6sx_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);