mxs: Convert sys_proto.h prefixes to 'mxs'

[u-boot] / board / freescale / p1010rdb / README

diff --git a/board/freescale/p1010rdb/README b/board/freescale/p1010rdb/README
index 022c023ae245ae13fbc52ae3f1b54f2bf1106c60..7f18aaa1b2a1aff66b20f5e20c8acd57c016a814 100644 (file)
--- a/board/freescale/p1010rdb/README
+++ b/board/freescale/p1010rdb/README
@@ -146,7 +146,6 @@ Build and burn u-boot to NAND flash
 3. Check SW4[1:4]= 1000 and SW6[4]=1, then power on.
 
 
-
 Build and burn u-boot to SPI flash
 ==================================
 1. Build u-boot-spi.bin image
@@ -166,7 +165,6 @@ Build and burn u-boot to SPI flash
 3. Check SW4[1:4]= 0110 and SW6[4]=0, then power on.
 
 
-
 CPLD POR setting registers
 ==========================
 1. Set POR switch selection register (addr 0xFFB00011) to 0.
@@ -197,7 +195,6 @@ Switch from NAND to NOR boot with Core/CCB/DDR (800/400/667 MHz):
        => reset
 
 
-
 Boot Linux from network using TFTP on P1010RDB
 ==============================================
 Place uImage, p1010rdb.dtb and rootfs files in the TFTP disk area.