powerpc: P1010RDB: Remove macros CONFIG_P1010RDB_PA and CONFIG_P1010RDB_PB

[u-boot] / board / freescale / p1010rdb / p1010rdb.c

diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c
index 8eecb0647b9f4d123d1a583f31531a8d7d4ad050..65bb575a9643836b613047e8375d65adf21ed214 100644 (file)
--- a/board/freescale/p1010rdb/p1010rdb.c
+++ b/board/freescale/p1010rdb/p1010rdb.c
@@ -54,7 +54,7 @@ static uint sd_ifc_mux;
 
 struct cpld_data {
        u8 cpld_ver; /* cpld revision */
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
        u8 pcba_ver; /* pcb revision number */
        u8 twindie_ddr3;
        u8 res1[6];
@@ -69,7 +69,7 @@ struct cpld_data {
        u8 por1; /* POR Options */
        u8 por2; /* POR Options */
        u8 por3; /* POR Options */
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
        u8 rom_loc;
 #endif
 };
@@ -135,7 +135,7 @@ int config_board_mux(int ctrl_type)
        ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
        u8 tmp;
 
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
        struct cpld_data *cpld_data = (void *)(CONFIG_SYS_CPLD_BASE);
 
        switch (ctrl_type) {
@@ -171,7 +171,7 @@ int config_board_mux(int ctrl_type)
        default:
                break;
        }
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
        uint orig_bus = i2c_get_bus_num();
        i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
 
@@ -245,7 +245,7 @@ int config_board_mux(int ctrl_type)
        return 0;
 }
 
-#ifdef CONFIG_P1010RDB_PB
+#ifdef CONFIG_TARGET_P1010RDB_PB
 int i2c_pca9557_read(int type)
 {
        u8 val;
@@ -275,9 +275,9 @@ int checkboard(void)
        u8 val;
 
        cpu = gd->arch.cpu;
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
        printf("Board: %sRDB-PA, ", cpu->name);
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
        printf("Board: %sRDB-PB, ", cpu->name);
        i2c_set_bus_num(I2C_PCA9557_BUS_NUM);
        i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_FSL_I2C_SLAVE);
@@ -290,10 +290,10 @@ int checkboard(void)
        config_board_mux(MUX_TYPE_IFC);
 #endif
 
-#if defined(CONFIG_P1010RDB_PA)
+#if defined(CONFIG_TARGET_P1010RDB_PA)
        val = (in_8(&cpld_data->pcba_ver) & 0xf);
        printf("PCB: v%x.0\n", val);
-#elif defined(CONFIG_P1010RDB_PB)
+#elif defined(CONFIG_TARGET_P1010RDB_PB)
        val = in_8(&cpld_data->cpld_ver);
        printf("CPLD: v%x.%x, ", val >> 4, val & 0xf);
        printf("PCB: v%x.0, ", i2c_pca9557_read(I2C_READ_PCB_VER));
@@ -544,7 +544,7 @@ int misc_init_r(void)
        else if (hwconfig("ifc"))
                config_board_mux(MUX_TYPE_IFC);
 
-#ifdef CONFIG_P1010RDB_PB
+#ifdef CONFIG_TARGET_P1010RDB_PB
        setbits_be32(&gur->pmuxcr2, MPC85xx_PMUXCR2_GPIO01_DRVVBUS);
 #endif
        return 0;