Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

[u-boot] / board / freescale / p1_p2_rdb_pc / p1_p2_rdb_pc.c

diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index 2e0e0c73aa4b766ee7d937b9615083c1c0316db1..a6756c68f40f3698a330249299a13b3bb9317a95 100644 (file)
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -1,23 +1,7 @@
 /*
- * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -30,7 +14,7 @@
 #include <asm/cache.h>
 #include <asm/immap_85xx.h>
 #include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
 #include <asm/io.h>
 #include <asm/fsl_law.h>
 #include <asm/fsl_lbc.h>
@@ -248,7 +232,7 @@ int checkboard(void)
                in_8(&cpld_data->pcba_rev) & 0x0F);
 
        /* Initialize i2c early for rom_loc and flash bank information */
-       i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+       i2c_set_bus_num(CONFIG_SYS_SPD_BUS_NUM);
 
        if (i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 0, 1, &in, 1) < 0 ||
            i2c_read(CONFIG_SYS_I2C_PCA9557_ADDR, 1, 1, &out, 1) < 0 ||
@@ -304,7 +288,7 @@ void pci_init_board(void)
 int board_early_init_r(void)
 {
        const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
-       const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+       int flash_esel = find_tlb_idx((void *)flashbase, 1);
 
        /*
         * Remap Boot flash region to caching-inhibited
@@ -315,8 +299,14 @@ int board_early_init_r(void)
        flush_dcache();
        invalidate_icache();
 
-       /* invalidate existing TLB entry for flash */
-       disable_tlb(flash_esel);
+       if (flash_esel == -1) {
+               /* very unlikely unless something is messed up */
+               puts("Error: Could not find TLB for FLASH BASE\n");
+               flash_esel = 2; /* give our best effort to continue */
+       } else {
+               /* invalidate existing TLB entry for flash */
+               disable_tlb(flash_esel);
+       }
 
        set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
                MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,/* perms, wimge */
@@ -370,7 +360,7 @@ int board_eth_init(bd_t *bis)
                puts("No address specified for VSC7385 microcode.\n");
 #endif
 
-       mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+       mdio_info.regs = TSEC_GET_MDIO_REGS_BASE(1);
        mdio_info.name = DEFAULT_MII_NAME;
 
        fsl_pq_mdio_init(bis, &mdio_info);