board: ls1043ardb: move sec_init to board_init

[u-boot] / board / freescale / p2041rdb / README

diff --git a/board/freescale/p2041rdb/README b/board/freescale/p2041rdb/README
index 292d0d39cf6be894919bbeebe4d3a5d3fa0f613b..9b5539fff33e00bc89b6592b7b044233e12c0f3f 100644 (file)
--- a/board/freescale/p2041rdb/README
+++ b/board/freescale/p2041rdb/README
@@ -18,8 +18,8 @@ Boot from NOR flash
 2. Program image
        => tftp 1000000 u-boot.bin
        => protect off all
-       => erase eff80000 efffffff
-       => cp.b 1000000 eff80000 80000
+       => erase eff40000 efffffff
+       => cp.b 1000000 eff40000 c0000
 
 3. Program RCW
        => tftp 1000000 rcw.bin
@@ -30,8 +30,8 @@ Boot from NOR flash
 4. Program FMAN Firmware ucode
        => tftp 1000000 ucode.bin
        => protect off all
-       => erase ef000000 ef0fffff
-       => cp.b 1000000 ef000000 2000
+       => erase eff00000 eff3ffff
+       => cp.b 1000000 eff00000 2000
 
 5. Change DIP-switch
        SW1[1-5] = 10110
@@ -50,11 +50,11 @@ Boot from SDCard
 3. Program the PBL image to SDCard
        => tftp 1000000 pbl_sd.bin
        => mmcinfo
-       => mmc write 1000000 8 441
+       => mmc write 1000000 8 672
 
 4. Program FMAN Firmware ucode
        => tftp 1000000 ucode.bin
-       => mmc write 1000000 46a 10
+       => mmc write 1000000 690 10
 
 5. Change DIP-switch
        SW1[1-5] = 01100