#include <asm/fsl_liodn.h>
#include <fm_eth.h>
#include "t102xrdb.h"
+#ifdef CONFIG_T1024RDB
#include "cpld.h"
+#elif defined(CONFIG_T1023RDB)
+#include <i2c.h>
+#include <mmc.h>
+#endif
#include "../common/sleep.h"
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_T1023RDB
+enum {
+ GPIO1_SD_SEL = 0x00020000, /* GPIO1_14, 0: eMMC, 1:SD/MMC */
+ GPIO1_EMMC_SEL,
+ GPIO3_GET_VERSION, /* GPIO3_4/5, 00:RevB, 01: RevC */
+ GPIO3_BRD_VER_MASK = 0x0c000000,
+ GPIO3_OFFSET = 0x2000,
+ I2C_GET_BANK,
+ I2C_SET_BANK0,
+ I2C_SET_BANK4,
+};
+#endif
+
int checkboard(void)
{
struct cpu_type *cpu = gd->arch.cpu;
srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
printf("Board: %sRDB, ", cpu->name);
- printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ",
+#if defined(CONFIG_T1024RDB)
+ printf("Board rev: 0x%02x CPLD ver: 0x%02x, ",
CPLD_READ(hw_ver), CPLD_READ(sw_ver));
+#elif defined(CONFIG_T1023RDB)
+ printf("Rev%c, ", t1023rdb_ctrl(GPIO3_GET_VERSION) + 'B');
+#endif
+ printf("boot from ");
#ifdef CONFIG_SDCARD
puts("SD/MMC\n");
#elif CONFIG_SPIFLASH
puts("SPI\n");
-#else
+#elif defined(CONFIG_T1024RDB)
u8 reg;
reg = CPLD_READ(flash_csr);
reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT);
printf("NOR vBank%d\n", reg);
}
+#elif defined(CONFIG_T1023RDB)
+#ifdef CONFIG_NAND
+ puts("NAND\n");
+#else
+ printf("NOR vBank%d\n", t1023rdb_ctrl(I2C_GET_BANK));
+#endif
#endif
puts("SERDES Reference Clocks:\n");
if (srds_s1 == 0x95)
printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]);
else
- printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]);
+ printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[1]);
return 0;
}
+#ifdef CONFIG_T1024RDB
static void board_mux_lane(void)
{
ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
}
CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN);
}
+#endif
int board_early_init_f(void)
{
#ifdef CONFIG_SYS_DPAA_QBMAN
setup_portals();
#endif
+#ifdef CONFIG_T1024RDB
board_mux_lane();
+#endif
return 0;
}
fdt_fixup_board_enet(blob);
#endif
+#ifdef CONFIG_T1023RDB
+ if (t1023rdb_ctrl(GPIO3_GET_VERSION) > 0)
+ fdt_enable_nor(blob);
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_T1023RDB
+/* Enable NOR flash for RevC */
+static void fdt_enable_nor(void *blob)
+{
+ int nodeoff = fdt_node_offset_by_compatible(blob, 0, "cfi-flash");
+
+ if (nodeoff >= 0)
+ fdt_status_okay(blob, nodeoff);
+ else
+ printf("WARNING unable to set status for NOR\n");
+}
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+ u32 val = in_be32(&pgpio->gpdat);
+
+ /* GPIO1_14, 0: eMMC, 1: SD/MMC */
+ val &= GPIO1_SD_SEL;
+
+ return val ? -1 : 1;
+}
+
+int board_mmc_getwp(struct mmc *mmc)
+{
+ ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+ u32 val = in_be32(&pgpio->gpdat);
+
+ val &= GPIO1_SD_SEL;
+
+ return val ? -1 : 0;
+}
+
+static u32 t1023rdb_ctrl(u32 ctrl_type)
+{
+ ccsr_gpio_t __iomem *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+ ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ u32 val, orig_bus = i2c_get_bus_num();
+ u8 tmp;
+
+ switch (ctrl_type) {
+ case GPIO1_SD_SEL:
+ val = in_be32(&pgpio->gpdat);
+ val |= GPIO1_SD_SEL;
+ out_be32(&pgpio->gpdat, val);
+ setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+ break;
+ case GPIO1_EMMC_SEL:
+ val = in_be32(&pgpio->gpdat);
+ val &= ~GPIO1_SD_SEL;
+ out_be32(&pgpio->gpdat, val);
+ setbits_be32(&pgpio->gpdir, GPIO1_SD_SEL);
+ break;
+ case GPIO3_GET_VERSION:
+ pgpio = (ccsr_gpio_t *)(CONFIG_SYS_MPC85xx_GPIO_ADDR
+ + GPIO3_OFFSET);
+ val = in_be32(&pgpio->gpdat);
+ val = ((val & GPIO3_BRD_VER_MASK) >> 26) & 0x3;
+ if (val == 0x3) /* GPIO3_4/5 not used on RevB */
+ val = 0;
+ return val;
+ case I2C_GET_BANK:
+ i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
+ i2c_read(I2C_PCA6408_ADDR, 0, 1, &tmp, 1);
+ tmp &= 0x7;
+ tmp = ((tmp & 1) << 2) | (tmp & 2) | ((tmp & 4) >> 2);
+ i2c_set_bus_num(orig_bus);
+ return tmp;
+ case I2C_SET_BANK0:
+ i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
+ tmp = 0x0;
+ i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
+ tmp = 0xf8;
+ i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
+ /* asserting HRESET_REQ */
+ out_be32(&gur->rstcr, 0x2);
+ break;
+ case I2C_SET_BANK4:
+ i2c_set_bus_num(I2C_PCA6408_BUS_NUM);
+ tmp = 0x1;
+ i2c_write(I2C_PCA6408_ADDR, 1, 1, &tmp, 1);
+ tmp = 0xf8;
+ i2c_write(I2C_PCA6408_ADDR, 3, 1, &tmp, 1);
+ out_be32(&gur->rstcr, 0x2);
+ break;
+ default:
+ break;
+ }
+ return 0;
+}
+
+static int switch_cmd(cmd_tbl_t *cmdtp, int flag, int argc,
+ char * const argv[])
+{
+ if (argc < 2)
+ return CMD_RET_USAGE;
+ if (!strcmp(argv[1], "bank0"))
+ t1023rdb_ctrl(I2C_SET_BANK0);
+ else if (!strcmp(argv[1], "bank4") || !strcmp(argv[1], "altbank"))
+ t1023rdb_ctrl(I2C_SET_BANK4);
+ else if (!strcmp(argv[1], "sd"))
+ t1023rdb_ctrl(GPIO1_SD_SEL);
+ else if (!strcmp(argv[1], "emmc"))
+ t1023rdb_ctrl(GPIO1_EMMC_SEL);
+ else
+ return CMD_RET_USAGE;
return 0;
}
+
+U_BOOT_CMD(
+ switch, 2, 0, switch_cmd,
+ "for bank0/bank4/sd/emmc switch control in runtime",
+ "command (e.g. switch bank4)"
+);
+#endif
projects / u-boot / blobdiff