board: ls2080a: Add "mcinitcmd" env for MC & DPL deployment

[u-boot] / board / freescale / t208xrdb / README

diff --git a/board/freescale/t208xrdb/README b/board/freescale/t208xrdb/README
index 24484cd0ffca70334ce50a76a0997a668f0c1e84..42b2b9239696b29fdb16fc626d896fa42eef8c62 100644 (file)
--- a/board/freescale/t208xrdb/README
+++ b/board/freescale/t208xrdb/README
@@ -107,16 +107,16 @@ Start Address  End Address      Description                       Size
 128M NOR Flash memory Map
 -------------------------
 Start Address   End Address    Definition                      Max size
-0xEFF40000     0xEFFFFFFF      u-boot (current bank)           768KB
-0xEFF20000     0xEFF3FFFF      u-boot env (current bank)       128KB
+0xEFF40000     0xEFFFFFFF      U-Boot (current bank)           768KB
+0xEFF20000     0xEFF3FFFF      U-Boot env (current bank)       128KB
 0xEFF00000     0xEFF1FFFF      FMAN Ucode (current bank)       128KB
 0xEFE00000     0xEFE3FFFF      PHY CS4315 firmware             256KB
 0xED300000     0xEFEFFFFF      rootfs (alt bank)               44MB
 0xEC800000     0xEC8FFFFF      Hardware device tree (alt bank) 1MB
 0xEC020000     0xEC7FFFFF      Linux.uImage (alt bank)         7MB + 875KB
 0xEC000000     0xEC01FFFF      RCW (alt bank)                  128KB
-0xEBF40000     0xEBFFFFFF      u-boot (alt bank)               768KB
-0xEBF20000     0xEBF3FFFF      u-boot env (alt bank)           128KB
+0xEBF40000     0xEBFFFFFF      U-Boot (alt bank)               768KB
+0xEBF20000     0xEBF3FFFF      U-Boot env (alt bank)           128KB
 0xEBF00000     0xEBF1FFFF      FMAN ucode (alt bank)           128KB
 0xEBE00000     0xEBE3FFFF      PHY CS4315 firmware (alt bank)  256KB
 0xE9300000     0xEBEFFFFF      rootfs (current bank)           44MB
@@ -155,11 +155,11 @@ Software configurations and board settings
 
    Switching between default bank and alternate bank on NOR flash
    To change boot source to vbank4:
-       via software:   run command 'cpld reset altbank' in u-boot.
+       via software:   run command 'cpld reset altbank' in U-Boot.
        via DIP-switch: set SW3[5:7] = '100'
 
    To change boot source to vbank0:
-       via software:   run command 'cpld reset' in u-boot.
+       via software:   run command 'cpld reset' in U-Boot.
        via DIP-Switch: set SW3[5:7] = '000'
 
 2. NAND Boot:
@@ -197,8 +197,8 @@ Software configurations and board settings
 -------------------------------
 PBL initializes the internal CPC-SRAM and copy SPL(160K) to SRAM.
 SPL further initializes DDR using SPD and environment variables
-and copy u-boot(768 KB) from NAND/SPI/SD device to DDR.
-Finally SPL transers control to u-boot for futher booting.
+and copy U-Boot(768 KB) from NAND/SPI/SD device to DDR.
+Finally SPL transers control to U-Boot for futher booting.
 
 SPL has following features:
  - Executes within 256K
@@ -218,14 +218,14 @@ Run time view of SPL framework
 -------------------------------------------------
 |STACK            | 0xFFFD8000 (22KB)          |
 -------------------------------------------------
-|U-boot SPL       | 0xFFFD8000 (160KB)         |
+|U-Boot SPL       | 0xFFFD8000 (160KB)         |
 -------------------------------------------------
 
 NAND Flash memory Map on T2080RDB
 --------------------------------------------------------------
 Start          End             Definition      Size
-0x000000       0x0FFFFF        u-boot img      1MB  (2 blocks)
-0x100000       0x17FFFF        u-boot env      512KB (1 block)
+0x000000       0x0FFFFF        U-Boot img      1MB  (2 blocks)
+0x100000       0x17FFFF        U-Boot env      512KB (1 block)
 0x180000       0x1FFFFF        FMAN ucode      512KB (1 block)
 0x200000       0x27FFFF        CS4315 ucode    512KB (1 block)
 
@@ -233,8 +233,8 @@ Start               End             Definition      Size
 Micro SD Card memory Map on T2080RDB
 ----------------------------------------------------
 Block          #blocks         Definition      Size
-0x008          2048            u-boot img      1MB
-0x800          0016            u-boot env      8KB
+0x008          2048            U-Boot img      1MB
+0x800          0016            U-Boot env      8KB
 0x820          0128            FMAN ucode      64KB
 0x8a0          0512            CS4315 ucode    256KB
 
@@ -242,8 +242,8 @@ Block               #blocks         Definition      Size
 SPI Flash memory Map on T2080RDB
 ----------------------------------------------------
 Start          End             Definition      Size
-0x000000       0x0FFFFF        u-boot img      1MB
-0x100000       0x101FFF        u-boot env      8KB
+0x000000       0x0FFFFF        U-Boot img      1MB
+0x100000       0x101FFF        U-Boot env      8KB
 0x110000       0x11FFFF        FMAN ucode      64KB
 0x120000        0x15FFFF        CS4315 ucode   256KB