#define SDRAM_SIZE ((64*1024*1024)-(12*4096))
-#define SERIAL_LOG_BUFFER KSEG1ADDR(SDRAM_SIZE + (8*4096))
+#define SERIAL_LOG_BUFFER CKSEG1ADDR(SDRAM_SIZE + (8*4096))
void inline log_serial_char(char c){
char *serial_log_buffer = (char*)SERIAL_LOG_BUFFER;
}
}
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
{
/* Sdram is setup by assembler code */
/* If memory could be changed, we should return the true value here */
return (SDRAM_SIZE);
}
-/* In cpu/mips/cpu.c */
+/* In arch/mips/cpu/cpu.c */
void write_one_tlb( int index, u32 pagemask, u32 hi, u32 low0, u32 low1 );
void set_ledcard(u32 value){
We need to map it into a 32 bit addresses */
write_one_tlb(20, /* index */
0x01ffe000, /* Pagemask, 16 MB pages */
- CFG_PCMCIA_IO_BASE, /* Hi */
+ CONFIG_SYS_PCMCIA_IO_BASE, /* Hi */
0x3C000017, /* Lo0 */
0x3C200017); /* Lo1 */
write_one_tlb(21, /* index */
0x01ffe000, /* Pagemask, 16 MB pages */
- CFG_PCMCIA_ATTR_BASE, /* Hi */
+ CONFIG_SYS_PCMCIA_ATTR_BASE, /* Hi */
0x3D000017, /* Lo0 */
0x3D200017); /* Lo1 */
write_one_tlb(22, /* index */
0x01ffe000, /* Pagemask, 16 MB pages */
- CFG_PCMCIA_MEM_ADDR, /* Hi */
+ CONFIG_SYS_PCMCIA_MEM_ADDR, /* Hi */
0x3E000017, /* Lo0 */
0x3E200017); /* Lo1 */
static void write_bootdata (volatile u16 * addr, u8 System, u8 Count)
{
u16 data;
- volatile u16 *flash = (u16 *) (CFG_FLASH_BASE);
+ volatile u16 *flash = (u16 *) (CONFIG_SYS_FLASH_BASE);
switch(System){
case FAILSAFE_BOOT:
u8 system = FAILSAFE_BOOT;
u8 count;
- addr = (u16 *) (CFG_FLASH_BASE + BOOTDATA_OFFSET);
+ addr = (u16 *) (CONFIG_SYS_FLASH_BASE + BOOTDATA_OFFSET);
if (*addr == 0xFFFF) {
printf ("*** No bootdata exists. ***\n");