sunxi: Add Wexler TAB7200 support

[u-boot] / board / iomega / iconnect / kwbimage.cfg

diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg
index 4b64dab5925121fb97f7e68bb731d91fd95c99a0..f4260fa5043c3bd96bfde2b81ca8ad17dd512644 100644 (file)
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -3,23 +3,9 @@
 # Wojciech Dubowik <wojciech.dubowik@neratec.com>
 # Luka Perkov <luka@openwrt.org>
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# SPDX-License-Identifier:     GPL-2.0+
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
 # and create kirkwood boot image
 #
 
@@ -34,7 +20,7 @@ NAND_PAGE_SIZE        0x0800
 # Configure RGMII-0 interface pad voltage to 1.8V
 DATA 0xffd100e0 0x1b1b1b9b
 
-#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+# Dram initalization for SINGLE x16 CL=5 @ 400MHz
 DATA 0xffd01400 0x43000c30     # DDR Configuration register
 # bit13-0:  0xc30, (3120 DDR2 clks refresh rate)
 # bit23-14: 0x0,
@@ -101,7 +87,7 @@ DATA 0xffd0141c 0x00000c52   # DDR Mode
 # bit6-4:   0x4, CL=5
 # bit7:     0x0, TestMode=0 normal
 # bit8:     0x0, DLL reset=0 normal
-# bit11-9:  0x6, auto-precharge write recovery ????????????
+# bit11-9:  0x6, auto-precharge write recovery
 # bit12:    0x0, PD must be zero
 # bit31-13: 0x0, required