odroid: kconfig: add odroid_defconfig

[u-boot] / board / ivm / ivm.c

diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 9bec198c2e90f1eb8b815a5c873ae54b16b6c71a..3bdbdd17d315c11bd4464e3da6a11c6ee24c7ea3 100644 (file)
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -3,23 +3,7 @@
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  * Ulrich Lutz, Speech Design GmbH, ulutz@datalab.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -322,7 +306,7 @@ void show_boot_progress (int status)
                        (status < 0) ? STATUS_LED_ON : STATUS_LED_OFF);
 # endif        /* STATUS_LED_YELLOW */
 # if defined(STATUS_LED_BOOT)
-       if (status == 6)
+       if (status == BOOTSTAGE_ID_DECOMP_IMAGE)
                status_led_set (STATUS_LED_BOOT, STATUS_LED_OFF);
 # endif        /* STATUS_LED_BOOT */
 #endif /* CONFIG_STATUS_LED */
@@ -333,13 +317,59 @@ void show_boot_progress (int status)
 void ide_set_reset (int on)
 {
        volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+       int i;
 
        /*
         * Configure PC for IDE Reset Pin
         */
        if (on) {               /* assert RESET */
                immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
+
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+               /* 12V Enable output OFF */
+               immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);
+
+               immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
+               immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
+               immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
+
+               /* wait 500 ms for the voltage to stabilize */
+               for (i = 0; i < 500; ++i)
+                       udelay(1000);
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
        } else {                /* release RESET */
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+               /* 12V Enable output ON */
+               immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE;
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
+
+#ifdef CONFIG_SYS_PB_IDE_MOTOR
+               /* configure IDE Motor voltage monitor pin as input */
+               immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+               immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+               immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+
+/* wait up to 1 s for the motor voltage to stabilize */
+               for (i = 0; i < 1000; ++i) {
+                       if ((immr->im_cpm.cp_pbdat
+                                       & CONFIG_SYS_PB_IDE_MOTOR) != 0)
+                               break;
+                       udelay(1000);
+               }
+
+               if (i == 1000) {        /* Timeout */
+                       printf("\nWarning: 5V for IDE Motor missing\n");
+#ifdef CONFIG_STATUS_LED
+#ifdef STATUS_LED_YELLOW
+                       status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
+#endif
+#ifdef STATUS_LED_GREEN
+                       status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
+#endif
+#endif /* CONFIG_STATUS_LED */
+               }
+#endif /* CONFIG_SYS_PB_IDE_MOTOR */
+
                immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
        }