scripts/Makefile* Add SPDX-License-Identifier tag

[u-boot] / board / keymile / km_arm / kwbimage_256M8_1.cfg

diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg
index 3e1237bbe31b1d2f7f67cbf5ff2c4cbce7c56393..3934138146bbf987b1fe22585d92fb6607341fd5 100644 (file)
--- a/board/keymile/km_arm/kwbimage_256M8_1.cfg
+++ b/board/keymile/km_arm/kwbimage_256M8_1.cfg
@@ -4,25 +4,9 @@
 # Norbert Mayer, Keymile AG, norbert.mayer@keymile.com
 # Deepak Patel, XENTECH Limited, deepak.patel@xentech.co.uk
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# SPDX-License-Identifier:     GPL-2.0+
 #
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-# MA 02110-1301 USA
-#
-# Refer docs/README.kwimage for more details about how-to configure
+# Refer doc/README.kwbimage for more details about how-to configure
 # and create kirkwood boot image
 #
 # This configuration applies to COGE5 design (ARM-part)
@@ -100,29 +84,8 @@ DATA 0xFFD20138 0x66666666  # L2 RAM Timing 1 Register
 # bit 19-18: 1, ECC RAM WTC RAM0
 # bit 31-20: ?,Reserved
 
-DATA 0xFFD20154 0x00000200     # CPU RAM Management Control3 Register
-# bit 23-0:  0x000200, Addr Config tuning
-# bit 31-24: 0,        Reserved
-
-# ??? Missing register # CPU RAM Management Control2 Register
-
-DATA 0xFFD2014C 0x00001C00     # CPU RAM Management Control1 Register
-# bit 15-0:  0x1C00, Opmux Tuning
-# bit 31-16: 0,      Pc Dp Tuning
-
-DATA 0xFFD20148 0x00000001     # CPU RAM Management Control0 Register
-# bit 1-0:   1, addr clk tune
-# bit 3-2:   0, reserved
-# bit 5-4:   0, dtcmp clk tune
-# bit 7-6:   0, reserved
-# bit 9-8:   0, macdrv clk tune
-# bit 11-10: 0, opmuxgm2 clk tune
-# bit 15-14: 0, rf clk tune
-# bit 17-16: 0, rfbypass clk tune
-# bit 19-18: 0, pc dp clk tune
-# bit 23-20: 0, icache clk tune
-# bit 27:24: 0, dcache clk tune
-# bit 31:28: 0, regfile tunin
+# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched!
+# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage
 
 # SDRAM initalization
 DATA 0xFFD01400 0x430004E0     # SDRAM Configuration Register