*/
#include <common.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/mxc_hdmi.h>
#include <asm/arch/sys_proto.h>
-#include <asm/imx-common/boot_mode.h>
-#include <asm/imx-common/iomux-v3.h>
-#include <asm/imx-common/mxc_i2c.h>
-#include <asm/imx-common/sata.h>
-#include <asm/imx-common/video.h>
+#include <asm/mach-imx/boot_mode.h>
+#include <asm/mach-imx/iomux-v3.h>
+#include <asm/mach-imx/mxc_i2c.h>
+#include <asm/mach-imx/sata.h>
+#include <asm/mach-imx/video.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <input.h>
int error;
struct stdio_dev dev = {
.name = "button",
- .flags = DEV_FLAGS_INPUT | DEV_FLAGS_SYSTEM,
+ .flags = DEV_FLAGS_INPUT,
.start = novena_gpio_button_init,
.getc = novena_gpio_button_getc,
.tstc = novena_gpio_button_tstc,
debug("%s: Cannot set up input\n", __func__);
return -1;
}
+ input_add_tables(&button_input, false);
button_input.read_keys = novena_gpio_button_read_keys;
error = input_stdio_register(&dev);
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
-#ifdef CONFIG_CMD_SATA
+#ifdef CONFIG_SATA
setup_sata();
#endif
/* Set SWBST to 5.0V and enable (for USB) */
pmic_reg_read(p, PFUZE100_SWBSTCON1, ®);
reg &= ~(SWBST_MODE_MASK | SWBST_VOL_MASK);
- reg |= (SWBST_5_00V | SWBST_MODE_AUTO);
+ reg |= (SWBST_5_00V | (SWBST_MODE_AUTO << SWBST_MODE_SHIFT));
pmic_reg_write(p, PFUZE100_SWBSTCON1, reg);
return 0;
int ret;
/* If 'ethaddr' is already set, do nothing. */
- if (getenv("ethaddr"))
+ if (env_get("ethaddr"))
return 0;
/* EEPROM is at bus 2. */
}
/* Set ethernet address from EEPROM. */
- eth_setenv_enetaddr("ethaddr", data.mac);
+ eth_env_set_enetaddr("ethaddr", data.mac);
return ret;
}