PATI board: fix compiler warnings

[u-boot] / board / mpl / pati / pati.c

diff --git a/board/mpl/pati/pati.c b/board/mpl/pati/pati.c
index 0883c429faa27d297b9f772e6466ca4cf45e4ffb..1b3b698ed90f776cbc44090c5079c04ae8aa5430 100644 (file)
--- a/board/mpl/pati/pati.c
+++ b/board/mpl/pati/pati.c
@@ -46,7 +46,7 @@
 
 #include <common.h>
 #include <mpc5xx.h>
-#include <devices.h>
+#include <stdio_dev.h>
 #include <pci_ids.h>
 #define PLX9056_LOC
 #include "plx9056.h"
@@ -224,7 +224,7 @@ phys_size_t initdram(int board_type)
        /* rest standard operation programmed write burst length */
        /* we have a x32 bit bus to the SDRAM, so shift the addr with 2 */
        lmr<<=2;
-       in32(CFG_SDRAM_BASE + lmr);
+       in32(CONFIG_SYS_SDRAM_BASE + lmr);
        /* ok, we're done, return SDRAM size */
        return ((0x400000 << sdram_table[i].sz));               /* log2 value of 4MByte  */
 }
@@ -287,7 +287,7 @@ void show_pld_regs(void)
  ****************************************************************/
  void init_ios(void)
  {
-       volatile immap_t * immr = (immap_t *) CFG_IMMR;
+       volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
        volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
        unsigned long reg;
        reg=sysconf->sc_sgpiocr; /* Data direction register */
@@ -304,7 +304,7 @@ void show_pld_regs(void)
 
 void user_led0(int led_on)
 {
-       volatile immap_t * immr = (immap_t *) CFG_IMMR;
+       volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
        volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
        unsigned long reg;
        reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -317,7 +317,7 @@ void user_led0(int led_on)
 
 void user_led1(int led_on)
 {
-       volatile immap_t * immr = (immap_t *) CFG_IMMR;
+       volatile immap_t * immr = (immap_t *) CONFIG_SYS_IMMR;
        volatile sysconf5xx_t *sysconf = &immr->im_siu_conf;
        unsigned long reg;
        reg=sysconf->sc_sgpiodt2; /* Data register */
@@ -347,8 +347,8 @@ int last_stage_init (void)
 
 int checkboard (void)
 {
-       unsigned char s[50];
-       unsigned long reg;
+       char s[50];
+       ulong reg;
        char rev;
        int i;
 
@@ -370,7 +370,7 @@ int checkboard (void)
 }
 
 
-#ifdef CFG_PCI_CON_DEVICE
+#ifdef CONFIG_SYS_PCI_CON_DEVICE
 /************************************************************************
  * PCI Communication
  *
@@ -447,7 +447,7 @@ int checkboard (void)
 int recbuf[REC_BUFFER_SIZE];
 static int r_ptr = 0;
 int w_ptr;
-device_t pci_con_dev;
+struct stdio_dev pci_con_dev;
 int conn=0;
 int buff_full=0;
 
@@ -584,7 +584,7 @@ void pci_con_connect(void)
        pci_con_dev.puts = pci_con_puts;
        pci_con_dev.getc = pci_con_getc;
        pci_con_dev.tstc = pci_con_tstc;
-       device_register (&pci_con_dev);
+       stdio_register (&pci_con_dev);
        printf("PATI ready for PCI connection, type ctrl-c for exit\n");
        do {
                udelay(10);
@@ -610,9 +610,9 @@ void pci_con_disc(void)
        irq_free_handler(0x02);
        pci_con_connect();
 }
-#endif /* #ifdef CFG_PCI_CON_DEVICE */
+#endif /* #ifdef CONFIG_SYS_PCI_CON_DEVICE */
 
 /*
  * Absolute environment address for linker file.
  */
-GEN_ABS(env_start, CONFIG_ENV_OFFSET + CFG_FLASH_BASE);
+GEN_ABS(env_start, CONFIG_ENV_OFFSET + CONFIG_SYS_FLASH_BASE);