/*
- *(C) Copyright 2005-2007 Netstal Maschinen AG
+ *(C) Copyright 2005-2008 Netstal Maschinen AG
* Niklaus Giger (Niklaus.Giger@netstal.com)
*
* This source code is free software; you can redistribute it
#include <common.h>
#include <command.h>
+#include <net.h>
+#include "nm.h"
-#ifdef CONFIG_CMD_BSP
-/*
- * Command nm_bsp: Netstal Maschinen BSP specific command
- */
-int nm_bsp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DEFAULT_ETH_ADDR "ethaddr"
+
+typedef struct {u8 id; char *name;} generation_info;
+
+generation_info generations[6] = {
+ {HW_GENERATION_HCU3, "HCU3"},
+ {HW_GENERATION_HCU4, "HCU4"},
+ {HW_GENERATION_HCU5, "HCU5"},
+ {HW_GENERATION_MCU, "MCU"},
+ {HW_GENERATION_MCU20, "MCU20"},
+ {HW_GENERATION_MCU25, "MCU25"},
+};
+
+void nm_show_print(int generation, int index, int hw_capabilities)
+{
+ int j;
+ char *generationName=0;
+
+ /* reset ANSI terminal color mode */
+ printf("\x1B""[0m""Netstal Maschinen AG: ");
+ for (j=0; j < (sizeof(generations)/sizeof(generations[0])); j++) {
+ if (generations[j].id == generation) {
+ generationName = generations[j].name;
+ break;
+ }
+ }
+ printf("%s: index %d HW 0x%x\n", generationName, index, hw_capabilities);
+ for (j = 0;j < 6; j++) {
+ hcu_led_set(1 << j);
+ udelay(200 * 1000);
+ }
+}
+
+void set_params_for_sw_install(int install_requested, char *board_name )
{
- printf("%s: flag %d, argc %d, argv[0] %s\n", __FUNCTION__,
- flag, argc, argv[0]);
- printf("Netstal Maschinen BSP specific command. None at the moment.\n");
- return 0;
+ if (install_requested) {
+ char string[128];
+
+ printf("\n\n%s SW-Installation: %d patching boot parameters\n",
+ board_name, install_requested);
+ setenv("bootdelay", "0");
+ setenv("loadaddr", "0x01000000");
+ setenv("serverip", "172.25.1.1");
+ setenv("bootcmd", "run install");
+ sprintf(string, "tftp ${loadaddr} admin/sw_on_hd; "
+ "tftp ${loadaddr} installer/%s_sw_inst; "
+ "run boot_sw_inst", board_name);
+ setenv("install", string);
+ sprintf(string, "setenv bootargs emac(0,0)c:%s/%s_sw_inst "
+ "e=${ipaddr} h=${serverip} f=0x1000; "
+ "bootvx ${loadaddr}%c",
+ board_name, board_name, 0);
+ setenv("boot_sw_inst", string);
+ }
}
-U_BOOT_CMD(
- nm_bsp, 1, 1, nm_bsp,
- "nm_bsp - Netstal Maschinen BSP specific command. \n",
- "Help for Netstal Maschinen BSP specific command.\n"
- );
-#endif
+void common_misc_init_r(void)
+{
+ IPaddr_t ipaddr;
+ char *ipstring;
+ uchar ethaddr[6];
+
+ if (!eth_getenv_enetaddr(DEFAULT_ETH_ADDR, ethaddr)) {
+ /* Must be in sync with CONFIG_ETHADDR */
+ u32 serial = get_serial_number();
+ ethaddr[0] = 0x00;
+ ethaddr[1] = 0x60;
+ ethaddr[2] = 0x13;
+ ethaddr[3] = (serial >> 16) & 0xff;
+ ethaddr[4] = (serial >> 8) & 0xff;
+ ethaddr[5] = hcu_get_slot();
+ eth_setenv_enetaddr(DEFAULT_ETH_ADDR, ethaddr);
+ }
+
+ /* IP-Adress update */
+ ipstring = getenv("ipaddr");
+ if (ipstring == 0)
+ ipaddr = string_to_ip("172.25.1.99");
+ else
+ ipaddr = string_to_ip(ipstring);
+ if ((ipaddr & 0xff) != (32 + hcu_get_slot())) {
+ char tmp[22];
+
+ ipaddr = (ipaddr & 0xffffff00) + 32 + hcu_get_slot();
+ ip_to_string (ipaddr, tmp);
+ printf("%s: enforce %s\n", __FUNCTION__, tmp);
+ setenv("ipaddr", tmp);
+ saveenv();
+ }
+}