SPDX: Convert all of our single license tags to Linux Kernel style

[u-boot] / board / raspberrypi / rpi / rpi.c

diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index aaa3a42abf59762763ffa1965022a944d1dd6c59..35f59395520731b304ef12df5919b7b85ac890bb 100644 (file)
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -1,13 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * (C) Copyright 2012-2016 Stephen Warren
- *
- * SPDX-License-Identifier:    GPL-2.0
  */
 
 #include <common.h>
 #include <inttypes.h>
 #include <config.h>
 #include <dm.h>
+#include <environment.h>
 #include <efi_loader.h>
 #include <fdt_support.h>
 #include <fdt_simplefb.h>
@@ -24,6 +24,7 @@
 #include <asm/armv8/mmu.h>
 #endif
 #include <watchdog.h>
+#include <dm/pinctrl.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -90,11 +91,36 @@ static const struct rpi_model rpi_model_unknown = {
 };
 
 static const struct rpi_model rpi_models_new_scheme[] = {
+       [0x0] = {
+               "Model A",
+               DTB_DIR "bcm2835-rpi-a.dtb",
+               false,
+       },
+       [0x1] = {
+               "Model B",
+               DTB_DIR "bcm2835-rpi-b.dtb",
+               true,
+       },
+       [0x2] = {
+               "Model A+",
+               DTB_DIR "bcm2835-rpi-a-plus.dtb",
+               false,
+       },
+       [0x3] = {
+               "Model B+",
+               DTB_DIR "bcm2835-rpi-b-plus.dtb",
+               true,
+       },
        [0x4] = {
                "2 Model B",
                DTB_DIR "bcm2836-rpi-2-b.dtb",
                true,
        },
+       [0x6] = {
+               "Compute Module",
+               DTB_DIR "bcm2835-rpi-cm.dtb",
+               false,
+       },
        [0x8] = {
                "3 Model B",
                DTB_DIR "bcm2837-rpi-3-b.dtb",
@@ -105,6 +131,21 @@ static const struct rpi_model rpi_models_new_scheme[] = {
                DTB_DIR "bcm2835-rpi-zero.dtb",
                false,
        },
+       [0xA] = {
+               "Compute Module 3",
+               DTB_DIR "bcm2837-rpi-cm3.dtb",
+               false,
+       },
+       [0xC] = {
+               "Zero W",
+               DTB_DIR "bcm2835-rpi-zero-w.dtb",
+               false,
+       },
+       [0xD] = {
+               "3 Model B+",
+               DTB_DIR "bcm2837-rpi-3-b-plus.dtb",
+               true,
+       },
 };
 
 static const struct rpi_model rpi_models_old_scheme[] = {
@@ -247,7 +288,7 @@ static void set_fdtfile(void)
 {
        const char *fdtfile;
 
-       if (getenv("fdtfile"))
+       if (env_get("fdtfile"))
                return;
 
        fdtfile = model->fdtfile;
@@ -260,7 +301,7 @@ static void set_fdtfile(void)
  */
 static void set_fdt_addr(void)
 {
-       if (getenv("fdt_addr"))
+       if (env_get("fdt_addr"))
                return;
 
        if (fdt_magic(fw_dtb_pointer) != FDT_MAGIC)
@@ -287,7 +328,7 @@ static void set_usbethaddr(void)
        if (!model->has_onboard_eth)
                return;
 
-       if (getenv("usbethaddr"))
+       if (env_get("usbethaddr"))
                return;
 
        BCM2835_MBOX_INIT_HDR(msg);
@@ -300,10 +341,10 @@ static void set_usbethaddr(void)
                return;
        }
 
-       eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
+       eth_env_set_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
 
-       if (!getenv("ethaddr"))
-               env_set("ethaddr", getenv("usbethaddr"));
+       if (!env_get("ethaddr"))
+               env_set("ethaddr", env_get("usbethaddr"));
 
        return;
 }
@@ -330,7 +371,7 @@ static void set_serial_number(void)
        int ret;
        char serial_string[17] = { 0 };
 
-       if (getenv("serial#"))
+       if (env_get("serial#"))
                return;
 
        BCM2835_MBOX_INIT_HDR(msg);
@@ -414,54 +455,11 @@ static void get_board_rev(void)
        printf("RPI %s (0x%x)\n", model->name, revision);
 }
 
-#ifndef CONFIG_PL01X_SERIAL
-static bool rpi_is_serial_active(void)
-{
-       int serial_gpio = 15;
-       struct udevice *dev;
-
-       /*
-        * The RPi3 disables the mini uart by default. The easiest way to find
-        * out whether it is available is to check if the RX pin is muxed.
-        */
-
-       if (uclass_first_device(UCLASS_GPIO, &dev) || !dev)
-               return true;
-
-       if (bcm2835_gpio_get_func_id(dev, serial_gpio) != BCM2835_GPIO_ALT5)
-               return false;
-
-       return true;
-}
-
-/* Disable mini-UART I/O if it's not pinmuxed to our pins.
- * The firmware only enables it if explicitly done in config.txt: enable_uart=1
- */
-static void rpi_disable_inactive_uart(void)
-{
-       struct udevice *dev;
-       struct bcm283x_mu_serial_platdata *plat;
-
-       if (uclass_get_device_by_driver(UCLASS_SERIAL,
-                                       DM_GET_DRIVER(serial_bcm283x_mu),
-                                       &dev) || !dev)
-               return;
-
-       if (!rpi_is_serial_active()) {
-               plat = dev_get_platdata(dev);
-               plat->disabled = true;
-       }
-}
-#endif
-
 int board_init(void)
 {
 #ifdef CONFIG_HW_WATCHDOG
        hw_watchdog_init();
 #endif
-#ifndef CONFIG_PL01X_SERIAL
-       rpi_disable_inactive_uart();
-#endif
 
        get_board_rev();