/*
* board/renesas/alt/alt.c
*
- * Copyright (C) 2014 Renesas Electronics Corporation
+ * Copyright (C) 2014, 2015 Renesas Electronics Corporation
*
* SPDX-License-Identifier: GPL-2.0
*/
#include <common.h>
#include <malloc.h>
+#include <dm.h>
+#include <dm/platform_data/serial_sh.h>
#include <asm/processor.h>
#include <asm/mach-types.h>
#include <asm/io.h>
-#include <asm/errno.h>
+#include <linux/errno.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
+#include <asm/arch/sh_sdhi.h>
#include <netdev.h>
#include <miiphy.h>
#include <i2c.h>
qos_init();
}
-#define MSTPSR1 0xE6150038
-#define SMSTPCR1 0xE6150134
#define TMU0_MSTP125 (1 << 25)
-
-#define MSTPSR7 0xE61501C4
-#define SMSTPCR7 0xE615014C
#define SCIF2_MSTP719 (1 << 19)
-
-#define MSTPSR8 0xE61509A0
-#define SMSTPCR8 0xE6150990
#define ETHER_MSTP813 (1 << 13)
-
-#define MSTPSR3 0xE6150048
-#define SMSTPCR3 0xE615013C
#define IIC1_MSTP323 (1 << 23)
+#define MMC0_MSTP315 (1 << 15)
+#define SDHI0_MSTP314 (1 << 14)
+#define SDHI1_MSTP312 (1 << 12)
-#define mstp_setbits(type, addr, saddr, set) \
- out_##type((saddr), in_##type(addr) | (set))
-#define mstp_clrbits(type, addr, saddr, clear) \
- out_##type((saddr), in_##type(addr) & ~(clear))
-#define mstp_setbits_le32(addr, saddr, set) \
- mstp_setbits(le32, addr, saddr, set)
-#define mstp_clrbits_le32(addr, saddr, clear) \
- mstp_clrbits(le32, addr, saddr, clear)
+#define SD1CKCR 0xE6150078
+#define SD1_97500KHZ 0x7
int board_early_init_f(void)
{
/* IIC1 / sh-i2c ch1 */
mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
- return 0;
-}
+#ifdef CONFIG_SH_MMCIF
+ /* MMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
+#endif
-void arch_preboot_os(void)
-{
- /* Disable TMU0 */
- mstp_setbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+#ifdef CONFIG_SH_SDHI
+ /* SDHI0, 1 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, SDHI0_MSTP314 | SDHI1_MSTP312);
+
+ /*
+ * SD0 clock is set to 97.5MHz by default.
+ * Set SD1 to the 97.5MHz as well.
+ */
+ writel(SD1_97500KHZ, SD1CKCR);
+#endif
+ return 0;
}
int board_init(void)
{
/* adress of boot parameters */
- gd->bd->bi_boot_params = ALT_SDRAM_BASE + 0x100;
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
/* Init PFC controller */
r8a7794_pinmux_init();
/* Ether Enable */
+#if defined(CONFIG_R8A7794_ETHERNET_B)
+ gpio_request(GPIO_FN_ETH_CRS_DV_B, NULL);
+ gpio_request(GPIO_FN_ETH_RX_ER_B, NULL);
+ gpio_request(GPIO_FN_ETH_RXD0_B, NULL);
+ gpio_request(GPIO_FN_ETH_RXD1_B, NULL);
+ gpio_request(GPIO_FN_ETH_LINK_B, NULL);
+ gpio_request(GPIO_FN_ETH_REFCLK_B, NULL);
+ gpio_request(GPIO_FN_ETH_MDIO_B, NULL);
+ gpio_request(GPIO_FN_ETH_TXD1_B, NULL);
+ gpio_request(GPIO_FN_ETH_TX_EN_B, NULL);
+ gpio_request(GPIO_FN_ETH_MAGIC_B, NULL);
+ gpio_request(GPIO_FN_ETH_TXD0_B, NULL);
+ gpio_request(GPIO_FN_ETH_MDC_B, NULL);
+#else
gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
gpio_request(GPIO_FN_ETH_RX_ER, NULL);
gpio_request(GPIO_FN_ETH_RXD0, NULL);
gpio_request(GPIO_FN_ETH_MAGIC, NULL);
gpio_request(GPIO_FN_ETH_TXD0, NULL);
gpio_request(GPIO_FN_ETH_MDC, NULL);
+#endif
gpio_request(GPIO_FN_IRQ8, NULL);
/* PHY reset */
unsigned char enetaddr[6];
ret = sh_eth_initialize(bis);
- if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+ if (!eth_env_get_enetaddr("ethaddr", enetaddr))
return ret;
/* Set Mac address */
#endif
}
+int board_mmc_init(bd_t *bis)
+{
+ int ret = -ENODEV;
+
+#ifdef CONFIG_SH_MMCIF
+ gpio_request(GPIO_GP_4_31, NULL);
+ gpio_set_value(GPIO_GP_4_31, 1);
+
+ ret = mmcif_mmc_init();
+#endif
+
+#ifdef CONFIG_SH_SDHI
+ gpio_request(GPIO_FN_SD0_DATA0, NULL);
+ gpio_request(GPIO_FN_SD0_DATA1, NULL);
+ gpio_request(GPIO_FN_SD0_DATA2, NULL);
+ gpio_request(GPIO_FN_SD0_DATA3, NULL);
+ gpio_request(GPIO_FN_SD0_CLK, NULL);
+ gpio_request(GPIO_FN_SD0_CMD, NULL);
+ gpio_request(GPIO_FN_SD0_CD, NULL);
+ gpio_request(GPIO_FN_SD1_DATA0, NULL);
+ gpio_request(GPIO_FN_SD1_DATA1, NULL);
+ gpio_request(GPIO_FN_SD1_DATA2, NULL);
+ gpio_request(GPIO_FN_SD1_DATA3, NULL);
+ gpio_request(GPIO_FN_SD1_CLK, NULL);
+ gpio_request(GPIO_FN_SD1_CMD, NULL);
+ gpio_request(GPIO_FN_SD1_CD, NULL);
+
+ /* SDHI 0 */
+ gpio_request(GPIO_GP_2_26, NULL);
+ gpio_request(GPIO_GP_2_29, NULL);
+ gpio_direction_output(GPIO_GP_2_26, 1);
+ gpio_direction_output(GPIO_GP_2_29, 1);
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI0_BASE, 0,
+ SH_SDHI_QUIRK_16BIT_BUF);
+ if (ret)
+ return ret;
+
+ /* SDHI 1 */
+ gpio_request(GPIO_GP_4_26, NULL);
+ gpio_request(GPIO_GP_4_29, NULL);
+ gpio_direction_output(GPIO_GP_4_26, 1);
+ gpio_direction_output(GPIO_GP_4_29, 1);
+
+ ret = sh_sdhi_init(CONFIG_SYS_SH_SDHI1_BASE, 1, 0);
+#endif
+ return ret;
+}
+
int dram_init(void)
{
gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
}
const struct rmobile_sysinfo sysinfo = {
- CONFIG_RMOBILE_BOARD_STRING
+ CONFIG_ARCH_RMOBILE_BOARD_STRING
};
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = ALT_SDRAM_BASE;
- gd->bd->bi_dram[0].size = ALT_SDRAM_SIZE;
-}
-
void reset_cpu(ulong addr)
{
u8 val;
val |= 0x02;
i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
}
+
+static const struct sh_serial_platdata serial_platdata = {
+ .base = SCIF2_BASE,
+ .type = PORT_SCIF,
+ .clk = 14745600,
+ .clk_mode = EXT_CLK,
+};
+
+U_BOOT_DEVICE(alt_serials) = {
+ .name = "serial_sh",
+ .platdata = &serial_platdata,
+};