SMDK2410: use the CFI driver (and remove the old one)

[u-boot] / board / samsung / smdk2410 / smdk2410.c

diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c
index 5d1a8bb0cf6bfd1b829f0b53582fb61488fd1734..1abc4ba6a5041dc1069b8557e02b197590959507 100644 (file)
--- a/board/samsung/smdk2410/smdk2410.c
+++ b/board/samsung/smdk2410/smdk2410.c
@@ -73,36 +73,36 @@ int board_init (void)
        struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
 
        /* to reduce PLL lock time, adjust the LOCKTIME register */
-       clk_power->LOCKTIME = 0xFFFFFF;
+       clk_power->locktime = 0xFFFFFF;
 
        /* configure MPLL */
-       clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+       clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
 
        /* some delay between MPLL and UPLL */
        delay (4000);
 
        /* configure UPLL */
-       clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+       clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
 
        /* some delay between MPLL and UPLL */
        delay (8000);
 
        /* set up the I/O ports */
-       gpio->GPACON = 0x007FFFFF;
-       gpio->GPBCON = 0x00044555;
-       gpio->GPBUP = 0x000007FF;
-       gpio->GPCCON = 0xAAAAAAAA;
-       gpio->GPCUP = 0x0000FFFF;
-       gpio->GPDCON = 0xAAAAAAAA;
-       gpio->GPDUP = 0x0000FFFF;
-       gpio->GPECON = 0xAAAAAAAA;
-       gpio->GPEUP = 0x0000FFFF;
-       gpio->GPFCON = 0x000055AA;
-       gpio->GPFUP = 0x000000FF;
-       gpio->GPGCON = 0xFF95FFBA;
-       gpio->GPGUP = 0x0000FFFF;
-       gpio->GPHCON = 0x002AFAAA;
-       gpio->GPHUP = 0x000007FF;
+       gpio->gpacon = 0x007FFFFF;
+       gpio->gpbcon = 0x00044555;
+       gpio->gpbup = 0x000007FF;
+       gpio->gpccon = 0xAAAAAAAA;
+       gpio->gpcup = 0x0000FFFF;
+       gpio->gpdcon = 0xAAAAAAAA;
+       gpio->gpdup = 0x0000FFFF;
+       gpio->gpecon = 0xAAAAAAAA;
+       gpio->gpeup = 0x0000FFFF;
+       gpio->gpfcon = 0x000055AA;
+       gpio->gpfup = 0x000000FF;
+       gpio->gpgcon = 0xFF95FFBA;
+       gpio->gpgup = 0x0000FFFF;
+       gpio->gphcon = 0x002AFAAA;
+       gpio->gphup = 0x000007FF;
 
        /* arch number of SMDK2410-Board */
        gd->bd->bi_arch_number = MACH_TYPE_SMDK2410;
@@ -134,3 +134,15 @@ int board_eth_init(bd_t *bis)
        return rc;
 }
 #endif
+
+/*
+ * Hardcoded flash setup:
+ * Flash 0 is a non-CFI AMD AM29LV800BB flash.
+ */
+ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
+{
+       info->portwidth = FLASH_CFI_16BIT;
+       info->chipwidth = FLASH_CFI_BY16;
+       info->interface = FLASH_CFI_X16;
+       return 1;
+}