#else
printf ("Board: Wind River SBC8540 Board\n");
#endif
- printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor));
+ printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor[0]));
printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2));
if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
{
/* Initialize all of memory for ECC, then
* enable errors */
- uint *p = 0;
- uint i = 0;
volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
- dma_init();
- for (*p = 0; p < (uint *)(8 * 1024); p++) {
- if (((unsigned int)p & 0x1f) == 0) { dcbz(p); }
- *p = (unsigned int)0xdeadbeef;
- if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); }
- }
- /* 8K */
- dma_xfer((uint *)0x2000,0x2000,(uint *)0);
- /* 16K */
- dma_xfer((uint *)0x4000,0x4000,(uint *)0);
- /* 32K */
- dma_xfer((uint *)0x8000,0x8000,(uint *)0);
- /* 64K */
- dma_xfer((uint *)0x10000,0x10000,(uint *)0);
- /* 128k */
- dma_xfer((uint *)0x20000,0x20000,(uint *)0);
- /* 256k */
- dma_xfer((uint *)0x40000,0x40000,(uint *)0);
- /* 512k */
- dma_xfer((uint *)0x80000,0x80000,(uint *)0);
- /* 1M */
- dma_xfer((uint *)0x100000,0x100000,(uint *)0);
- /* 2M */
- dma_xfer((uint *)0x200000,0x200000,(uint *)0);
- /* 4M */
- dma_xfer((uint *)0x400000,0x400000,(uint *)0);
-
- for (i = 1; i < dram_size / 0x800000; i++) {
- dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0);
- }
+ dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
/* Enable errors for ECC */
ddr->err_disable = 0x00000000;