ARM: mvebu: a38x: sync ddr training code with upstream

[u-boot] / board / solidrun / clearfog / clearfog.c

diff --git a/board/solidrun/clearfog/clearfog.c b/board/solidrun/clearfog/clearfog.c
index 61de16d19e0cb1edf710e230cb7ca2f8ac176339..cc11feb85e30273c4ea002058a548a23adb7002f 100644 (file)
--- a/board/solidrun/clearfog/clearfog.c
+++ b/board/solidrun/clearfog/clearfog.c
@@ -11,7 +11,7 @@
 #include <asm/arch/cpu.h>
 #include <asm/arch/soc.h>
 
-#include "../drivers/ddr/marvell/a38x/ddr3_a38x_topology.h"
+#include "../drivers/ddr/marvell/a38x/ddr3_init.h"
 #include <../serdes/a38x/high_speed_env_spec.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -69,7 +69,8 @@ int hws_board_topology_load(struct serdes_map **serdes_map_array, u8 *count)
  * be used by the DDR3 init code in the SPL U-Boot version to configure
  * the DDR3 controller.
  */
-static struct hws_topology_map board_topology_map = {
+static struct mv_ddr_topology_map board_topology_map = {
+       DEBUG_LEVEL_ERROR,
        0x1, /* active interfaces */
        /* cs_mask, mirror, dqs_swap, ck_swap X PUPs */
        { { { {0x1, 0, 0, 0},
@@ -78,17 +79,18 @@ static struct hws_topology_map board_topology_map = {
              {0x1, 0, 0, 0},
              {0x1, 0, 0, 0} },
            SPEED_BIN_DDR_1600K,        /* speed_bin */
-           BUS_WIDTH_16,               /* memory_width */
-           MEM_4G,                     /* mem_size */
+           MV_DDR_DEV_WIDTH_16BIT,     /* memory_width */
+           MV_DDR_DIE_CAP_4GBIT,       /* mem_size */
            DDR_FREQ_800,               /* frequency */
            0, 0,                       /* cas_wl cas_l */
-           HWS_TEMP_LOW,               /* temperature */
-           HWS_TIM_DEFAULT} },         /* timing */
-       5,                              /* Num Of Bus Per Interface*/
-       BUS_MASK_32BIT                  /* Busses mask */
+           MV_DDR_TEMP_LOW} },         /* temperature */
+       BUS_MASK_32BIT,                 /* Busses mask */
+       MV_DDR_CFG_DEFAULT,             /* ddr configuration data source */
+       { {0} },                        /* raw spd data */
+       {0}                             /* timing parameters */
 };
 
-struct hws_topology_map *ddr3_get_topology_map(void)
+struct mv_ddr_topology_map *mv_ddr_topology_map_get(void)
 {
        /* Return the board topology as defined in the board code */
        return &board_topology_map;