#include <asm/armv7m.h>
#include <asm/arch/stm32.h>
#include <asm/arch/gpio.h>
-#include <asm/arch/rcc.h>
#include <asm/arch/fmc.h>
#include <dm/platdata.h>
#include <dm/platform_data/serial_stm32x7.h>
#include <asm/arch/stm32_periph.h>
#include <asm/arch/stm32_defs.h>
+#include <asm/arch/syscfg.h>
DECLARE_GLOBAL_DATA_PTR;
.otype = STM32_GPIO_OTYPE_PP,
.speed = STM32_GPIO_SPEED_50M,
.pupd = STM32_GPIO_PUPD_UP,
- .af = STM32_GPIO_AF8
+ .af = STM32_GPIO_AF7
};
const struct stm32_gpio_ctl gpio_ctl_fmc = {
return rv;
}
-/*
- * STM32 RCC FMC specific definitions
- */
-#define RCC_ENR_FMC (1 << 0) /* FMC module clock */
-
static inline u32 _ns2clk(u32 ns, u32 freq)
{
u32 tmp = freq/1000000;
if (rv)
return rv;
- setbits_le32(RCC_BASE + RCC_AHB3ENR, RCC_ENR_FMC);
+ clock_setup(FMC_CLOCK_CFG);
/*
* Get frequency for NS2CLK calculation.
}
static const struct stm32_gpio_dsc usart_gpio[] = {
- {STM32_GPIO_PORT_C, STM32_GPIO_PIN_6}, /* TX */
- {STM32_GPIO_PORT_C, STM32_GPIO_PIN_7}, /* RX */
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_9}, /* TX */
+ {STM32_GPIO_PORT_B, STM32_GPIO_PIN_7}, /* RX */
};
int uart_setup_gpio(void)
int i;
int rv = 0;
- clock_setup(GPIO_C_CLOCK_CFG);
+ clock_setup(GPIO_A_CLOCK_CFG);
+ clock_setup(GPIO_B_CLOCK_CFG);
for (i = 0; i < ARRAY_SIZE(usart_gpio); i++) {
rv = stm32_gpio_config(&usart_gpio[i], &gpio_ctl_usart);
if (rv)
}
static const struct stm32x7_serial_platdata serial_platdata = {
- .base = (struct stm32_usart *)USART6_BASE,
+ .base = (struct stm32_usart *)USART1_BASE,
.clock = CONFIG_SYS_CLK_FREQ,
};
.platdata = &serial_platdata,
};
+#ifdef CONFIG_ETH_DESIGNWARE
+const struct stm32_gpio_ctl gpio_ctl_eth = {
+ .mode = STM32_GPIO_MODE_AF,
+ .otype = STM32_GPIO_OTYPE_PP,
+ .speed = STM32_GPIO_SPEED_100M,
+ .pupd = STM32_GPIO_PUPD_NO,
+ .af = STM32_GPIO_AF11
+};
+
+static const struct stm32_gpio_dsc eth_gpio[] = {
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_1}, /* ETH_RMII_REF_CLK */
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_2}, /* ETH_MDIO */
+ {STM32_GPIO_PORT_A, STM32_GPIO_PIN_7}, /* ETH_RMII_CRS_DV */
+
+ {STM32_GPIO_PORT_C, STM32_GPIO_PIN_1}, /* ETH_MDC */
+ {STM32_GPIO_PORT_C, STM32_GPIO_PIN_4}, /* ETH_RMII_RXD0 */
+ {STM32_GPIO_PORT_C, STM32_GPIO_PIN_5}, /* ETH_RMII_RXD1 */
+
+ {STM32_GPIO_PORT_G, STM32_GPIO_PIN_11}, /* ETH_RMII_TX_EN */
+ {STM32_GPIO_PORT_G, STM32_GPIO_PIN_13}, /* ETH_RMII_TXD0 */
+ {STM32_GPIO_PORT_G, STM32_GPIO_PIN_14}, /* ETH_RMII_TXD1 */
+};
+
+static int stmmac_setup(void)
+{
+ int res = 0;
+ int i;
+
+ clock_setup(SYSCFG_CLOCK_CFG);
+
+ /* Set >RMII mode */
+ STM32_SYSCFG->pmc |= SYSCFG_PMC_MII_RMII_SEL;
+
+ clock_setup(GPIO_A_CLOCK_CFG);
+ clock_setup(GPIO_C_CLOCK_CFG);
+ clock_setup(GPIO_G_CLOCK_CFG);
+
+ for (i = 0; i < ARRAY_SIZE(eth_gpio); i++) {
+ res = stm32_gpio_config(ð_gpio[i], &gpio_ctl_eth);
+ if (res)
+ return res;
+ }
+
+ clock_setup(STMMAC_CLOCK_CFG);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_STM32_QSPI
+const struct stm32_gpio_ctl gpio_ctl_qspi_9 = {
+ .mode = STM32_GPIO_MODE_AF,
+ .otype = STM32_GPIO_OTYPE_PP,
+ .speed = STM32_GPIO_SPEED_100M,
+ .pupd = STM32_GPIO_PUPD_NO,
+ .af = STM32_GPIO_AF9
+};
+
+const struct stm32_gpio_ctl gpio_ctl_qspi_10 = {
+ .mode = STM32_GPIO_MODE_AF,
+ .otype = STM32_GPIO_OTYPE_PP,
+ .speed = STM32_GPIO_SPEED_100M,
+ .pupd = STM32_GPIO_PUPD_NO,
+ .af = STM32_GPIO_AF10
+};
+
+static const struct stm32_gpio_dsc qspi_af9_gpio[] = {
+ {STM32_GPIO_PORT_B, STM32_GPIO_PIN_2}, /* QUADSPI_CLK */
+ {STM32_GPIO_PORT_D, STM32_GPIO_PIN_11}, /* QUADSPI_BK1_IO0 */
+ {STM32_GPIO_PORT_D, STM32_GPIO_PIN_12}, /* QUADSPI_BK1_IO1 */
+ {STM32_GPIO_PORT_D, STM32_GPIO_PIN_13}, /* QUADSPI_BK1_IO3 */
+ {STM32_GPIO_PORT_E, STM32_GPIO_PIN_2}, /* QUADSPI_BK1_IO2 */
+};
+
+static const struct stm32_gpio_dsc qspi_af10_gpio[] = {
+ {STM32_GPIO_PORT_B, STM32_GPIO_PIN_6}, /* QUADSPI_BK1_NCS */
+};
+
+static int qspi_setup(void)
+{
+ int res = 0;
+ int i;
+
+ clock_setup(GPIO_B_CLOCK_CFG);
+ clock_setup(GPIO_D_CLOCK_CFG);
+ clock_setup(GPIO_E_CLOCK_CFG);
+
+ for (i = 0; i < ARRAY_SIZE(qspi_af9_gpio); i++) {
+ res = stm32_gpio_config(&qspi_af9_gpio[i], &gpio_ctl_qspi_9);
+ if (res)
+ return res;
+ }
+
+ for (i = 0; i < ARRAY_SIZE(qspi_af10_gpio); i++) {
+ res = stm32_gpio_config(&qspi_af10_gpio[i], &gpio_ctl_qspi_10);
+ if (res)
+ return res;
+ }
+
+ return 0;
+}
+#endif
+
u32 get_board_rev(void)
{
return 0;
int res;
res = uart_setup_gpio();
- clock_setup(USART6_CLOCK_CFG);
+ clock_setup(USART1_CLOCK_CFG);
+ if (res)
+ return res;
+
+#ifdef CONFIG_ETH_DESIGNWARE
+ res = stmmac_setup();
+ if (res)
+ return res;
+#endif
+
+#ifdef CONFIG_STM32_QSPI
+ res = qspi_setup();
if (res)
return res;
+#endif
return 0;
}