snowball: Clear UART RX FIFO

[u-boot] / board / st-ericsson / snowball / snowball.c

diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
index 7c3e08ce3f5602e7b3d3fc58e804030002fea9f4..e750df189ddd8b53d2bc62a4a44bddaf5d29128f 100644 (file)
--- a/board/st-ericsson/snowball/snowball.c
+++ b/board/st-ericsson/snowball/snowball.c
@@ -27,7 +27,11 @@
 #include <asm/arch/db8500_pincfg.h>
 #include <asm/arch/prcmu.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/sys_proto.h>
 
+#ifdef CONFIG_MMC
+#include "../../../drivers/mmc/arm_pl180_mmci.h"
+#endif
 #include "db8500_pins.h"
 
 /*
@@ -249,5 +253,100 @@ int board_late_init(void)
        if ((raise_ab8500_gpio16() < 0))
                printf("error: cant' raise GPIO16\n");
 
+       /* empty UART RX FIFO */
+       while (tstc())
+               (void) getc();
+
+       return 0;
+}
+
+#ifdef CONFIG_MMC
+/*
+ * emmc_host_init - initialize the emmc controller.
+ * Configure GPIO settings, set initial clock and power for emmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int emmc_host_init(void)
+{
+       struct pl180_mmc_host *host;
+
+       host = malloc(sizeof(struct pl180_mmc_host));
+       if (!host)
+               return -ENOMEM;
+       memset(host, 0, sizeof(*host));
+
+       host->base = (struct sdi_registers *)CFG_EMMC_BASE;
+       host->pwr_init = SDI_PWR_OPD | SDI_PWR_PWRCTRL_ON;
+       host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
+                                SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+       strcpy(host->name, "EMMC");
+       host->caps = MMC_MODE_8BIT | MMC_MODE_HS | MMC_MODE_HS_52MHz;
+       host->voltages = VOLTAGE_WINDOW_MMC;
+       host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
+       host->clock_max = ARM_MCLK / 2;
+       host->clock_in = ARM_MCLK;
+       host->version2 = 1;
+
+       return arm_pl180_mmci_init(host);
+}
+
+/*
+ * mmc_host_init - initialize the external mmc controller.
+ * Configure GPIO settings, set initial clock and power for mmc slot.
+ * Initialize mmc struct and register with mmc framework.
+ */
+static int mmc_host_init(void)
+{
+       struct pl180_mmc_host *host;
+       u32 sdi_u32;
+
+       host = malloc(sizeof(struct pl180_mmc_host));
+       if (!host)
+               return -ENOMEM;
+       memset(host, 0, sizeof(*host));
+
+       host->base = (struct sdi_registers *)CFG_MMC_BASE;
+       sdi_u32 = 0xBF;
+       writel(sdi_u32, &host->base->power);
+       host->pwr_init = 0xBF;
+       host->clkdiv_init = SDI_CLKCR_CLKDIV_INIT_V2 |
+                                SDI_CLKCR_CLKEN | SDI_CLKCR_HWFC_EN;
+       strcpy(host->name, "MMC");
+       host->caps = MMC_MODE_8BIT;
+       host->b_max = 0;
+       host->voltages = VOLTAGE_WINDOW_SD;
+       host->clock_min = ARM_MCLK / (2 + SDI_CLKCR_CLKDIV_INIT_V2);
+       host->clock_max = ARM_MCLK / 2;
+       host->clock_in = ARM_MCLK;
+       host->version2 = 1;
+
+       return arm_pl180_mmci_init(host);
+}
+
+/*
+ * board_mmc_init - initialize all the mmc/sd host controllers.
+ * Called by generic mmc framework.
+ */
+int board_mmc_init(bd_t *bis)
+{
+       int error;
+
+       (void) bis;
+
+       error = emmc_host_init();
+       if (error) {
+               printf("emmc_host_init() %d\n", error);
+               return -1;
+       }
+
+       u8500_mmc_power_init();
+
+       error = mmc_host_init();
+       if (error) {
+               printf("mmc_host_init() %d\n", error);
+               return -1;
+       }
+
        return 0;
 }
+#endif /* CONFIG_MMC */